Thought i'd pass this info along. To continue along on my project, I needed to clean the inner frame, i'm thinking there was some sort of mouse nest or something along those lines inside the frame. I started by jacking the rear of the frame up and jamming a garden hose down the rail and then blasting water down it, water was running out of everywhere but the end of the rail, it was plugged up. After looking around the garage to use something to stick in the frame to wiggle loose the crap inside, I found an old manual choke cable, perfect, I took out the inner wire out and grabbed the cordless drill, inserted the cable to the end of the chuck, stuck it in the frame holes and pulled the trigger, it worked great, moving from hole to hole with the water running I eventually was able to get the crap out and water was flowwing free out the end of the rail, to speed along drying, I stuck the end of the air hose in and blasted it with compressed air, worked great!











