• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Inspection Height

CJ who???

Full Member
Joined
Mar 25, 2011
Messages
173
Loc.
Banning, Ca...
If you have 35" tires now, go find a set of stock rims and tires. If you put a set of 28" tires on your Bronco, it should lower it down about 3.5" right there... Leave them a little low on air and add a little weight in the Bronco and you should be good to go....
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
You need to be about 26" in front and just bolting another bracket to it inorder to lower it won't work. I had a older 3.5 lift with 33's and tried the smaller tire (31's) didn't help much, ended up taking it somewhere else and they passed it. Call me and I'll give you some ideas.
Steve 314-568-5169
 

Ranchtruck

Sr. Member
Joined
Feb 7, 2008
Messages
768
I had a lifted subaru, and since it fell under "passenger car" rather than "truck" I was only allowed 20" to the bumper instead of 30". Not sure why they all shouldn't be 30", they're driving the same roads and hitting each other.

But anyway, I put the stock wheels on, loaded some steel ingots in the smugglers hatch under the floor in the back and in the spare tire well in the front, and dropped it to 19.5". That proved to the inspection station that the car could be at inspectable height when they saw it. Inspections from there out I left it with the big tires on and no weight.

The key is that the inspector has to be able to say it was at legal height when they saw it. It doesn't matter what you do as soon as you drive it home, because then the liability is on you. Just don't be a douche and tell the cop "It just passed inspection like this" when he pulls you over because that will absolutely screw over the inspector. Their inspection license can get pulled, they can get fined big bucks, the inspection station gets a warning against it or shut down plus fines, and all that adds up to huge losses to the shop.

Just do the dance to get it at the legal height to pass, and tell the cop you modified it after the sticker was put on if you get hassled about it.
 
OP
OP
70bronc

70bronc

Sr. Member
Joined
Jul 4, 2004
Messages
399
Loc.
st. peters, MO
Thanks for all the tips..... alot to digest. Steve i'll give ya a call as well, need to update you on my rig anyways (I'm the Matt that was talking to you about finding another EB about a month ago).
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Matt, I'll be at the farm this weekend (no cell service), so call me on Monday
Steve
 
Top