• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Installing Fuel Pump Eccentric

stanz

Jr. Member
Joined
Feb 11, 2005
Messages
101
Loc.
Portland
Really basic question but I’ve never had to deal with this before...

I’m about to install a 2 piece fuel pump eccentric on a roller motor. I picked up Comp Cams kit, it’s got the bolt hole and a tab to hold it in place. Does the tab go into the dowel hole for the cam? I assume it does but want to be sure as I am surprised that I cannot find the answer online.

The tab is slightly smaller than the dowel hole. I assume that is ok?
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, yes you are correct. I use blue locktite and torque it to specs on that one. Don't forget to give the new chain plenty of oil before you put the cover on. Good luck
 
OP
OP
stanz

stanz

Jr. Member
Joined
Feb 11, 2005
Messages
101
Loc.
Portland
Hi, yes you are correct. I use blue locktite and torque it to specs on that one. Don't forget to give the new chain plenty of oil before you put the cover on. Good luck

Thanks! Is oil better than assembly lube for the chain?
 
Top