• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Instrument cluster gauges

bronco121

New Member
Joined
Mar 28, 2011
Messages
4
Loc.
Spokane
Maybe someone has had this same problem. My fuel, oil and temp gauges just stopped working during a drive. Pegged all the way to the right. Everything works except these 3 things. Cluster is all stock. Switched out the small instrument cluster regulator just in case, no change. Any ideas would be appreciated, thx.
 

oleguy74

Contributor
Bronco Guru
Joined
Mar 26, 2008
Messages
2,034
Loc.
calif city ca
lost ground to cluster?easy way to test is to dics temp sender wire connect volt meter to lead from gauge and see if you have a pulsing voltage from 4-6 volts.O turn key to accessory.
 
OP
OP
B

bronco121

New Member
Joined
Mar 28, 2011
Messages
4
Loc.
Spokane
Just put new VR on back of cluster, still the same thing, gauges all the way right. Still checking for ground issue.
 
OP
OP
B

bronco121

New Member
Joined
Mar 28, 2011
Messages
4
Loc.
Spokane
Ok, replaced my new instrument VR with new one from Tom's, now the gauges are fluctuating, pegging to the right for a second then returning to normal. Seems like cluster and all wires are good behind dash. Not sure what to check next
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Ok, replaced my new instrument VR with new one from Tom's, now the gauges are fluctuating, pegging to the right for a second then returning to normal. Seems like cluster and all wires are good behind dash. Not sure what to check next

Add a ground wire from the IVR mounting screw to a spot on the firewall.
 
Top