• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Interesting PullaPart Find

BoureeOne

Bronco Guru
Joined
Mar 28, 2011
Messages
3,068
Loc.
Madisonville, La
Was grabbing some parts at the PullaPart yesterday. Came across these. They are on an 89 Bronco. Would these have any application on an Early Bronco? I have no desire for them, but if someone wants me to go pull them, lets talk.

Scott
 

Attachments

  • Chrome Radius Arms.jpg
    Chrome Radius Arms.jpg
    114.6 KB · Views: 293
  • Chrome Radius Arms 2.jpg
    Chrome Radius Arms 2.jpg
    133.7 KB · Views: 227
  • Chrome Radius Arms 4.jpg
    Chrome Radius Arms 4.jpg
    66.6 KB · Views: 219

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Those look a lot like a pair I made for a desert race truck years ago that had coilovers. Gave us 24" of travel and rode like glass over 12-18" whoops.

Jim W.
 

PaveBronco

Sr. Member
Joined
Oct 30, 2012
Messages
914
Would need a bunch of modification, not really worth it, unless you're putting the TTB under yours, which I hope you're not..
might check the rest of the truck, shocks, rear locker..maybe.. you can pull and re-sell, make some money.
 
OP
OP
BoureeOne

BoureeOne

Bronco Guru
Joined
Mar 28, 2011
Messages
3,068
Loc.
Madisonville, La
I will be going back to this Pull a part this Saturday. I will go look at this Bronco again. Question, I have no experience with Locker Rear Ends. I have read several articles on line on how to identify if it is a locker, and I have read different things. Is having the rear end off the ground, in neutral, and spinning one wheel to see if the other spins in the same direction, a good enough test? Or does there need to be some force applied to get the locker to engage? I will have no need for a rear end like this, but if it has something desirable under it I will certainly pull it to resale. Any advice is appreciated.

Scott
 
Top