• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Kick down on transmission

Bronk74

Sr. Member
Joined
Sep 1, 2004
Messages
414
Loc.
North Las Vegas
Took Bronco out for a spin and onto the highway first time in years and opened her up.
So it’s a 74 302 c4 trans. Aftermarket floor shifter installed. 33’s and stock gears
I noticed up around 60 seems like there needs to be a kick down gear for highway travel. Any suggestions on installation and acquiring kick down mechanism?


P.s. boy nothing sounds so good as a 302 on the open highway! 🛣️
 

Tiko433

Contributor
I know just enough to be dangerous
Joined
Jul 9, 2014
Messages
1,898
Loc.
Bolivia, North Carolina
When I had that set up , I used a cable system. I have not looked in a while but all of our Bronco vendors have it. Also Locar should have one
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Stock gears gives us 2 choices.
Either the base 3.50 gears, which are highway gears with 33s. I would expect the kick down from 3rd into 2nd to be useful. There is also a tangent that can spin off on "don't fear the gear" and 4.11s.
The other stock gear would be the 4.11s. which with a solid mounted cooling fan will leave you thinking it needs to upshift one more gear once you start cruising. But that tangent would be telling you that is the right gear.

I'll ask what are you running for a carb (or EFI)? Once you are going with non-stock stuff it often gets easier to just do the aftermarket cable kits. Besides Bronco vendors there are generic speed parts shops (Summit, Jegs) as this stuff is generic and not Bronco specific.
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,760
Loc.
CA
Is your question really about a kick down or about another gear?

You say kick down and just in case you're using the wrong words, kick down means to kick down into a lower gear like when you floor it and want to accelerate, but your description sounds like you want an additional gear, like overdrive. (apologies if you do already understand this and really do mean kick-down).

To add another gear, like a cruising gear for freeway speeds, you'd need a different trans. As an example, the AOD is kinda like a C4, but with one more "Overdrive" gear for highway cruising speeds.
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The OE kick down works for me for me and has for 46 yrs. As does the rest of the linkage. The after market set up is shiny linkage is shinier tho.
 
OP
OP
Bronk74

Bronk74

Sr. Member
Joined
Sep 1, 2004
Messages
414
Loc.
North Las Vegas
Stock gears gives us 2 choices.
Either the base 3.50 gears, which are highway gears with 33s. I would expect the kick down from 3rd into 2nd to be useful. There is also a tangent that can spin off on "don't fear the gear" and 4.11s.
The other stock gear would be the 4.11s. which with a solid mounted cooling fan will leave you thinking it needs to upshift one more gear once you start cruising. But that tangent would be telling you that is the right gear.

I'll ask what are you running for a carb (or EFI)? Once you are going with non-stock stuff it often gets easier to just do the aftermarket cable kits. Besides Bronco vendors there are generic speed parts shops (Summit, Jegs) as this stuff is generic and not Bronco specific.
4 barrel Holley truck avenger
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I’m with ba. It sounds like you’re talking about two different things.
At 60 miles an hour, do you want it to kick down into second when you push the throttle to the floor to accelerate? Or you trying to get a smoother, quieter, engine RPM at cruising speed?
For that, u need to at least know where you are now.
You need to know what your exact tire size is (not just what’s written on the side) and what gear ratio you have in the differential.
From there, you can use one of the charts or calculators, or equations to figure out your actual engine RPM. Or get a tachometer…
Broncos always seem to sound louder on the highway than other vehicles, so you can’t just go by ear. Also depends on your exhaust.
And do you know that you’re really going 60 miles an hour? Is your speedometer calibrated for your tire size?

If you really did mean kickdown, maybe some of the C4 experienced members here can tell you if a bronco is actually going to ever kick down at 60 miles an hour with the stock transmission.
It might be over the speed limitations of the stock transmission setup.

And another first of all, did you ever reconnect the stock, factory installed kickdown lever/rod from your new carburetor? If so, does it kick down when you are going slower, such as 40 miles an hour?
 

BronCowie

Contributor
Old Timer
Joined
Apr 24, 2007
Messages
8,290
Loc.
Vancouver, WA
When I bought my Bronco (with a C4), it did not have a kickdown rod. There were times when I would have to manually downshift when going uphill to avoid bogging down the engine. Then, years later, the old C4 needed a rebuild. I took it to a reputable shop and asked them to add a kickdown cable during the rebuild. Wow, what a difference that made.
 
Last edited:
Top