• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LED light conversion

Dmarsh

New Member
Joined
Nov 14, 2011
Messages
3
Has anyone converted to LED turn signals, side marker lights and brake lights? If so how did it turn out and which route did you take (replacement bulbs, complete unit replacement, etc...)?
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Has anyone converted to LED turn signals, side marker lights and brake lights? If so how did it turn out and which route did you take (replacement bulbs, complete unit replacement, etc...)?

I bought the set,turn,side,brake from Toms Or WH,can't remember. It came with "loads" to put in the system so the turn siginals would blink at the right speed. I have a heavy duty flasher and didn't have to put the loads in.
I would just buy the bulbs and if they flash too fast get a new flasher,apparently the new ones are made to run with LED's.
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
Put the Tom's kit in. Very happy with the look, gives it a bright & distinct look & last a lot longer!
 
Top