• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

let's see your broken parts

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
The world's most expensive 44.
Run a Briggs 5 horse, clutch drive, and a golfcart body. Some PVC cage for weight and your golden.

pffft. I figger with the original build cost (including gears and an ARB..narrowing (its an HP 44)..numerous axle and u-joint upgrade/replace/break cycles at about 1 grand per pop with Jantz joints..busted hubs..grenaded entire outer knuckle..I prolly have spent over 3 grand in parts alone on that stupid 44.%) I don't give up easily.;D

PVC roll cage??..are you nucking futz?. I'm going with an all aluminum roll cage and bumpers. Vacuum cleaner tubing...;)
 
Top