• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Liftgate Latch Assembly

rge40

New Member
Joined
Aug 6, 2014
Messages
2
Hi guys,

I have been having more than enough trouble with my liftgate. Both rods broke so the lift gate would open and slap shut every time I would drive. I figured this would be a simple fix but it has proven to be much more difficult than I originally thought. After spending a lot of time on this, especially when it came to drilling out the old roll pins that seemed as if they had been welded in, I am at the point of reassembly. Does anyone have a picture that shows how I need to place the rods in the latches so when I insert the roll pins everything will work? As it sits now, I can't figure out how to insert the roll pins so the rods are the correct length to the handle mechanism and will open the latches. I tried looking for info online but cannot figure this out. Thanks in advance for all of your help.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Best Pics I have. I believe the roll pin keeps the whole bolt/spring/frame assembly together (the bolt can't come out as the roll pin prevents it from sliding through the round spring holder). You compress the bolt so the rear of it moves out the assembly and you attach the rod. Then let go and the spring pulls the rod back up to the rear of the assembly.
 

Attachments

  • rsz_img_4870.jpg
    rsz_img_4870.jpg
    134.9 KB · Views: 142
  • rsz_img_4872.jpg
    rsz_img_4872.jpg
    54.9 KB · Views: 129
  • rsz_img_4871.jpg
    rsz_img_4871.jpg
    88.2 KB · Views: 166
  • rsz_img_5913.jpg
    rsz_img_5913.jpg
    41.5 KB · Views: 161
  • rsz_img_5915.jpg
    rsz_img_5915.jpg
    40.2 KB · Views: 158
Last edited:
Top