FOX offers a compression dampening adjuster on their reservoir shocks. The base shock is about $10 more than the Bilstein 7100 and then the CD adjuster add-on costs an extra $75. It appeared to me that this offered the best of all worlds. I could dial it softer or firmer depending on driving conditions...and there really is a big difference as you adjust the shock's compression (there are 8-positions and I was told that there is a total of 30% change in the dampening...however, it feels great thatn that to me).
I am in the middle of installing the rears today--I had to replace the real bearings/seals....fronts went on a couple of weeks ago...going from dual Cage shocks on dual Cage mounts to the single FOXs at each corner. With this set-up, there are few things to consider since the shock bodies are very different...mostly clearance of the hoses VS the Cage mounts...so far I havent had to do any trimming, but I did have to mount the fronts Dr side hose out and Pass side hose inward (clears). The rears will have to be mounted cans down, which I am not crazy about, but it should not affect function...the body/eyelets just wouldnt moutn top-side up due to the design of the Cage dual mounts. I will try to get some pics and post up on function in the next week. After doing the math, I went with 12" travel shocks at each corner.
I am excited to get it back on the road and see how they ride. Appears to be a very nice product and Nick at Offroad Warehouse was super-cool in answering questions and being patient with me as I figured out what I wanted, providing advice on valving and then dealing with a return/rebuild after I blew one of them up by breaking a hose during the initial install (see the clearance issue noted above)...can you say 200 psi worth of oil EVERYWHERE. I would highly recommend Offroad Warehouse...and they will perform the first revalve for you for free if you want to make changes.
Good luck with your choices.
Good luck.