• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Looking for Bilstein shocks

66ALRIDE

Just BIP It!
Joined
May 9, 2005
Messages
1,785
Loc.
Dothan, AL
I've got a 3.5" Wildhorses lift with dual shocks. Looking for something like a set of Bilstein shocks or a good adjustable shock anyway. Mostly a street driven truck with the occasional off road experience. Any one have any suggestions or part numbers? Thanks in advance.
 

70EB

Bronco Guru
Joined
Aug 31, 2003
Messages
1,621
Loc.
Gig Harbor
Since you have hoops in the front, below is the best combination that I have heard about.

Front - 7100 series - AK7112SB 12 inch travel - short body with Reservoir
360/80 Valving

Rear - 5125 series - BE5-6248-H5 10 inch travel with 255/70 valving
 

trailpsycho

Bronco Guru
Joined
Dec 11, 2003
Messages
4,856
FOX offers a compression dampening adjuster on their reservoir shocks. The base shock is about $10 more than the Bilstein 7100 and then the CD adjuster add-on costs an extra $75. It appeared to me that this offered the best of all worlds. I could dial it softer or firmer depending on driving conditions...and there really is a big difference as you adjust the shock's compression (there are 8-positions and I was told that there is a total of 30% change in the dampening...however, it feels great thatn that to me).

I am in the middle of installing the rears today--I had to replace the real bearings/seals....fronts went on a couple of weeks ago...going from dual Cage shocks on dual Cage mounts to the single FOXs at each corner. With this set-up, there are few things to consider since the shock bodies are very different...mostly clearance of the hoses VS the Cage mounts...so far I havent had to do any trimming, but I did have to mount the fronts Dr side hose out and Pass side hose inward (clears). The rears will have to be mounted cans down, which I am not crazy about, but it should not affect function...the body/eyelets just wouldnt moutn top-side up due to the design of the Cage dual mounts. I will try to get some pics and post up on function in the next week. After doing the math, I went with 12" travel shocks at each corner.

I am excited to get it back on the road and see how they ride. Appears to be a very nice product and Nick at Offroad Warehouse was super-cool in answering questions and being patient with me as I figured out what I wanted, providing advice on valving and then dealing with a return/rebuild after I blew one of them up by breaking a hose during the initial install (see the clearance issue noted above)...can you say 200 psi worth of oil EVERYWHERE. I would highly recommend Offroad Warehouse...and they will perform the first revalve for you for free if you want to make changes.

Good luck with your choices.

Good luck.
 
OP
OP
66ALRIDE

66ALRIDE

Just BIP It!
Joined
May 9, 2005
Messages
1,785
Loc.
Dothan, AL
On the Wildhorses front shock hoops the top of the shock will be an eyelet like the rears. What info would I need before an order is placed. I know they can tell me, but I like real world opinions first.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
Since you have hoops in the front, below is the best combination that I have heard about.

Front - 7100 series - AK7112SB 12 inch travel - short body with Reservoir
360/80 Valving

Rear - 5125 series - BE5-6248-H5 10 inch travel with 255/70 valving

^ ^ ^ what he said! ^ ^ ^ call lee at raceshock.com, tell him you're a member of this website for a 10% discount. just talked to him last week. they'll work with hoops or F-250 shock towers.
 

BoltBuster

Bronco Guru
Joined
Jun 5, 2002
Messages
2,051
3.5" Lift Stock mounts

REAR Bilstein F4-BE5-A463-H7 - Bilstein 5125 Series Shocks

FRONT Bilstein F4BE56528H6 - Bilstein 5100 Series Shocks

I called Bilstein direct when I had ordered these from summit to get an idea of what the Series were and find out what fits a 67'. The rep said the only difference in requirement of the 7100 vs the 5100 series is driving at speeds from 100 to 70mph vs. 60 to 30mph across desert rocks and holes for extended amount of time.

The REP also said PROCOMP and Summit were the largest suppliers for Bilstien

The other thing was I purchased them from Summit because the local 4x4 shops in this area were charging almost 100% over cost of Summits catalog price, which is a total ripoff.

Your Front shocks will be determined on the mounts(stock, hoops, dual towers, etc.) after a certain lift height the series will go from 5100 to 7100
 
Top