Looking for Pics of TRO set up with F150 knuckles. (Installed now)

[arizona 71]

Hey Langester, Thought about this some more and checked on the RuffStuff site, the insert/ sleeve for the pitman arm has a larger ID. You will need one of these Ruff Stuff PN. DLINSERT and one, two in a pack, PN.INSSTEER-2PK for the GM 1ton TREs. But talk with Ruff Stuff they will make sure you get just what you need. If this is what you want. Gary

 

[langester]

Thanks for the info!
I am using WH 3 way adjustable tie rod and drag link. The only thing I think I need to change is moving the tie rod to the TRO position. Problem is TRE's are F150 to fit the F150 knuckles I have, and not 1 ton Chevy, the taper looks to be the same but not sure about the O.D. comparing the two ends. These are brand new parts I have and would like to make them work instead of starting over with a new 1 ton set up. I can get tapered sleeves and a reamer and make my parts work. I was just curious about the ones Ruff Stuff sells, I would not need a reamer for those.

 

[langester]

I got the TRO done last weekend. It changed the steering dramatically, I need to address the camber next and add a stabilizer. I think this part of the problem is fixed.
Here is a pic in case anyone else is ever looking for one with this exact setup.