• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Not so much that its EFI...but that it would have to be made to custom dimensions. Every tank manufacturer has a "universal tank" or tanks made for specific vehicles (like a older pickup/hotrod).

It's when you give them the exact dimensions that you want the price shoots up. Some of them won't even relocate the filler. You can only get it made like "the one in the picture".

When you do find a manufacturer that is happy to build a tank any way you want...you know the price is going to be around that $1000 mark.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I notched the rear cross member about half of its width to clear the rear diff cover. I picked up my tank from www.harmonracingcells.com. He's family so I got it at the family rate but it still was not cheap.

I was thinking that instead of pulling the rear crossmember altogether you could raise it up like the notch then make your tank taller to pick up the capacity lost with relocating the axle. You could add a crossmember in front of the rear axle and or add one at the rear behind the tank hidden by the bumper.

Im planning on raising the whole rear bed floor to hide my new c notch.

this is a friends truck and he has raised the bed. ImageUploadedByTapatalk1359302311.989871.jpg ImageUploadedByTapatalk1359302324.007057.jpg ImageUploadedByTapatalk1359302334.204931.jpg
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Another option. Thanks for posting Bill. I was thinking if I needed more space I would cut the wheel wells out with the plasma cutter and just make them 2-3" wider then weld them back in. That way I could retain the depth of the bed area and still clear the notches.We would only be hauling luggage and a cooler back there anyways, and would have the Truxedo cover over the top of the bed.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Hmmm, I hear raising the bed floor and widening the wheel tubs talk.
I guess I took the right approach. In my case there will not be much bed but, it is going to look similar to stock.

I want to run with and without cap and Tonneau cover.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Here are some picks of the front end, basic stuff a arms coil overs, hes going for something along the lines of autocross type racing and street.

I have also attached two pics of the different looks for the one piece windows. Since we can not get around the inner supports I thought I would see which version is preferred. I plan on attaching mirrors to this piece as well.
ImageUploadedByTapatalk1359323505.787664.jpg ImageUploadedByTapatalk1359323515.182082.jpg ImageUploadedByTapatalk1359323523.281135.jpg ImageUploadedByTapatalk1359323538.010538.jpg ImageUploadedByTapatalk1359323554.194443.jpg
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I have the front end screwed together and was working on the gaps, at this time I think the original hood is a better choice than this one. I have my doubts that it is square. ImageUploadedByTapatalk1359323676.809569.jpg ImageUploadedByTapatalk1359323687.275539.jpg ImageUploadedByTapatalk1359323706.231051.jpg ImageUploadedByTapatalk1359323719.394828.jpg ImageUploadedByTapatalk1359323728.560382.jpg


The drivers side front corner curls out to the grill, the drivers side rear is bent up and actually back towards the windshield.

I have a nice gap on the drivers side but the rear of the fender needs to come out to make the fender and door line up better.
The passenger side has a good gap at the rear by the door but gets wider at the front. The odd thing is that the fender and grill line up well.

All that is left now with this is to have the inner fender body work done, the core painted so that I can weld it all together again.

Then I will cut the rear bed out and get ready for the bigger c notch going in.

I am thinking now with the raising of the bed that I may move the tank fill to the inside of the bed, drop the tail gate to fill up.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
I like the first of the two pictures for the one piece window.


I am going to try sticking with the vent windows however just try making them small to accomodate the chop. Still not sure what can be done but that is the thought at this time.


I like your friends truck, tough looking with the wide wheels up front as well.
That frame is really beefed up.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Bill it is nice to see that you are getting your truck back together from the accident.
I am sure that knocked the wind out of you.

I have my 77 year old father in law living with me now. (going on 4 months)
First snow here in MI I took my Red Bronco out to spend some time in 4x4 ;) That night I pulled in the drive so that the city can plow the road. First time ever I parked behind someone go figure... My father in law tried to get out the next morning without asking me to move the truck and...

Well needless to say, I have some work. His spare tire was off (jeep) and the 3 bolts that hung the spare went into my figerglass grill. One bullet type hole in the lower portion and the grill is cracked. It took him a month to see or admit, yesterday he said I can "bondo" it up for you.

Yea right

Not bad, but the whole thing sucks. I know I will not be able to match the red paint so... I may be painting the grill satin black. I used my remaining touch up when I painted the doors.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I will check it out. Seems most of these guys sell these items but won't tell you who actually manufacturers them.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Yeah that lil accident has taken a large toll on the bronco owner relationship. Quite a few times lately one or both have been about put up for sale.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
It's never been an easy thing to do owning a Bronco. But as time passes I realize that's exactly why I love my Broncos. I get as much satisfaction from the work I do as from driving them.

There are always good days and bad, but when the day is done the only thing that bothers me is the money not the time spent. You can always make more money, and you can't take it with you.

Besides...I have a lot of great memories with all my Broncos. It's kind of like a life lesson. Just the memories of the times with my kids and my Bronco more than make up for any of the bad stuff.

This is the longest I have gone without driving a Bronco nearly every day for years. My daily driver has been in restoration since last August. Call me strange but its probably a good thing that the Bronco Connection is 60 miles away, cause there aren't many days go by that I don't think about going to see what work is being done.

I can't wait to get back behind the wheel of my '68 halfcab. I get no greater satisfaction out if anything else than cruising in my Bronco. It may well be my addiction...but it is also my medication!
 

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Tanks inc

I will check it out. Seems most of these guys sell these items but won't tell you who actually manufacturers them.

Tanks Inc is part of Yogi's Street Rod parts from Iowa. Yes they are having these parts made oversea's, but these are great parts and great guys to deal with. They stand behind all their parts and have done a great job in designing them. I have know them for a long time and you will not find a better group of guys in the street rod industry.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well with some help from a fellow Bronco Brother (thank you motoman), I have at least got some idea what my project will look like. This is approximately what I believe this truck will end up with as far are rake and stance. Of course the rubber won't be as high on the sidewalls. :p
 

Attachments

  • FIVE B.jpg
    FIVE B.jpg
    232.9 KB · Views: 126
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I prefer the streetrod look to the pro-street look myself. I want to drive this thing across the state not just up and down the avenue. Don't get me wrong. I would drive the crap out of a blown 429 if you loaned me one! :p
 
Top