not much on lowering, but.....
I feel weird writing this, but heres an idea.... I was just looking at shocks to eliminate my coils in the front. I decided it was too much of a project at the time (financially). I did go to a custom fab shop that fixes, and sells parts for lifting, and probably lowering an off road vehicle and others. He had several options with air pressure to set ride height, which is what I was looking at. I have 3.5 inch suspension with 2 inch body now. I was thinking of getting these shocks to add my lift by a couple of inches, but only for offroad. They make them with air charge, and can be purchased reasonably. So I would suggest going to a custom fab shop and seeing what options you have on pneudraulic shocks....... Maybe even build an onboard aircompressor under the hood to inflate after shows..... The shocks I looked at eliminated the coils all together. As for the rear: You can put a swap on your swivel mount for your rear leaf to the front with solid rear. Then you can axle over. Just an idea. If you use either, send me some pics, I wouldn't mind seeing how it works for ya.....