• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Marty you need to get moving on this build... You and Behemoth are my inspiration.

Have a shipping number on my shipment, it will be heading to MI next Tuesday!
11,000 miles on setup!
 

Attachments

  • crate1.jpg
    crate1.jpg
    120.3 KB · Views: 102

Dano 407

Full Member
Joined
Sep 7, 2007
Messages
301
Loc.
The Orange Groves
Although my sons will hate it, my next project will be an uncut, chopped windshield roadster EB. I've been on this for ten years since I saw a very nice 2 wd Blazer that a local guy put together with his son. Great cruiser.

I am thinking 5.0, Mustang II front, no door frames...... AHHHHHH

Are there any pics available of the fabled 2 wd 78-79 Domino's pizza Broncos? I read someplace that Ford built two or three for them as promo vehicles. Do they still exist?
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Bill, Marty,

Can you provide advice on wheels for the front. There is a set of centerline wheels that match my rear wheels on ebay... However I am unsure of the backspacing, they are 4 7/8 BACK SPACING I have no clue on what backspacing I will need. What have you experienced? Will this backspacing be OK? I would like to pick them up if this will work.

Thanks,

Ed
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
Did U keep the oe frnt discs?, that's the rub (pun intended), or TRO (nother)?
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Did U keep the oe frnt discs?, that's the rub (pun intended), or TRO (nother)?

Mustang ii suspension, tubular arms 11"rotors/disks
(calipers, disks... nothing special)

If Bill's 5-6" backspacing work on the front of his I should be OK.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Did any of you weigh the rear of your truck? Just curious I would like to get a set of rear springs for the coil overs so that it can stand on it's own... If you have weighed yours it may help with a first guess, a chance in avoiding buying a second set later.

Thanks
 

backpain

Bronco Guru
Joined
Oct 2, 2007
Messages
1,094
Just driving it around a bit while figuring out the next step with the rear suspension. Shopping shocks and or coil overs.

I am also looking to make a windbrake like on the bmw convertables.


time to shave the door handles yet?
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
post 593 on this thread.

mine with the 5.0 and aod was 2920 with 1300lbs rear and 1600 lbs front.

I have since removed over 150lbs from this thing. That falcon bench seat weighed a ton.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Thanks again I thought you had posted that.

Hmmm, I took a guess and started with 125lbs springs/ rear... I think I should have started with less. The vehicle is a little lighter than I thought.

Thats a good thing ;)
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Round 2 for me with my truck.

Looks like I will get to repeat all of the work on the front end, core support, grill radiator lights, inner fenders, core support. Oh joy.

I was actually backed into by the rental truck, he came back 8 feet made contact and then hit the gas. crunch. I was trying for reverse but missed and the car behind me appreciated that. I think everybody in a 2 mile radius heard me yelling (screaming like a little girl) CHIIIIITT.

It still has not sunk in yet, dont know if I am pissed or what. Its home in the garage and covered since I cant look at it.
 

Attachments

  • Photo0420.jpg
    Photo0420.jpg
    278.4 KB · Views: 262
  • Photo0427.jpg
    Photo0427.jpg
    114.4 KB · Views: 245
  • Photo0426.jpg
    Photo0426.jpg
    269.1 KB · Views: 236
  • Photo0425 (Medium).jpg
    Photo0425 (Medium).jpg
    60.1 KB · Views: 231

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
OMG!!!! that fawking sucks!!!! i'da put foot to azz...dayum, sorry dude!! will their ins help take care of it?
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Since he backed up at a stop light in traffic into me his rental insurance as well as his personal insurance will have claims against them. We shall see how things go next week.

It was good to see Dales in the mag, lots of things that I was not aware of previously.

Its another bright sunny day here maybe I will take a drive in the other one today.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Not good... Looks like you have a winter project. I hope all goes well and you can at least get the cash for the repair work.

Wow I feel for you...
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
what a stupid son of a !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! well, maybe you can get a paint job out of the deal huh?
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Sorry to hear about that. I hope that everything turns out well with the Bronco, and glad that he at least stopped at the grill. Sometimes people are stupid. :p
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Well, its both fenders, the grill, both inner fenders (the ones I made), the core support, the inner fender supports, the parts that the inner fenders hang from, the radiator, the hood as it was rolled under and possibly the passenger door. Its in the insurance adjusters hands we shall see.

Any pics or progress on yours Marty? Did you get the body off ?
 
Top