• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
I lub me some pic !
Oh I C it here ur sig: "...4 Link Rear Street Rod Project".

and now, below of ur last post - 2 'thumbnail"s.
Not shown installed (or is it?) but still looks like it would give a 3 or 4 inch lift, no?
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
The pic is deceiving. The horizontal bars are pretty close to parallel, as was suggested when installed.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Starting to look pretty under the hood. I don't think there is room for a turbo.
 

Attachments

  • IMG_2150.JPG
    IMG_2150.JPG
    121.7 KB · Views: 138

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
I can imagine your anticipation to get it done :)

This was a couple years ago. We should have this beast running this year before the snow flies.

All the metal has been replaced, but I don't think I want to do anything with the beautiful Cordova Brown paint. You can still see the Phillips 66 ghosted into both rear quarters.:cool:
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I will be RODDING this before summer gets here!

Who would have though that a 63 Thunderbird console would fit so snug in a half cab?
 

Attachments

  • CONSOLE 3.png
    CONSOLE 3.png
    145.5 KB · Views: 140
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Ok...time for an update. We are coming down the home stretch. I believe that this has been a 10 YEAR PROJECT...but I have honestly lost count. Putting the front clip back on and taking the next leg of the journey next week.

Then it's on to the last few steps before my "adult go cart" is fully ready for some quality seat time.

Up next:
1 - Body shop for touch up and paint the windshield and window frames
2 - Windows installed
3 - Exhaust installed....through the lower front quarters
4 - Gears and axles..3:89 TracLoc Posi...31 spline axles
5 - Roll cage....for obvious reasons
 

Attachments

  • IMG_3859.jpg
    IMG_3859.jpg
    32.3 KB · Views: 150
  • IMG_4938.JPG
    IMG_4938.JPG
    155.5 KB · Views: 140
  • IMG_4823.JPG
    IMG_4823.JPG
    137.3 KB · Views: 171
  • IMG_3858.jpg
    IMG_3858.jpg
    29.7 KB · Views: 163

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Wow that's one of the nicest lowered broncos I have seen! I would drive that all day everyday!

By the way, where did you get the brake bracket?
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
it sez 'chopped' how much 2 inches?
exhaust (out) "thru lower frnt 1/4" (is that fenders? So that will be 'fender well headers'? out in frnt of the 2 doors? ). I seek a single 'out' thru the pass's rocker in frnt of rear tire. Need a preformed method. One co hasa boxed, weld-in exhaust tip/rocker panel (stang, some are dual) but isa weird tear shaped. Can U use something pre-made? Know of a few co.s who make these?
Thnx
"...been a 10 YEAR PROJECT...."
a guy on one of these forms hasa sig "still wrkin on it", I been messin w/mine 38 yrs, is it ever nota 'project'?
8^ 0
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Chopped 3". Have to weld in the ports to pass the exhaust out through the 1/4 panel just in front of the wheel well. It's going to take some fab but totally worth it in the end.
 

Attachments

  • IMG_4999.jpg
    IMG_4999.jpg
    22.4 KB · Views: 100
  • IMG_4997.jpg
    IMG_4997.jpg
    25.1 KB · Views: 103

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
the tan/brn will B gone in the final?
I like the sheet metal bead nxt to the splayed/flanged exhaust tip.

So no known co.s?
The double (& tear drop) was 'stangs 2 fear'
 

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
Here I was thinking the project was done years ago, and the thread pops back up lol. Best looking lowered bronco I've seen IMO, love the 32V 4.6. Some people don't like them, its one of my favs. Had an 03 Mach 1 and an 03 Cobra, love the sound and the way they pull. That exhaust is pretty slick on your Bronco, keep it up. Any ideas on paint?
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
Side note::that 1 is straight, most the typical vendors have an off-set one (cranks it over to driver's side 20*) like the OE one I believe...
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I bought that off of EBay I think. Someone here was selling them a few years back. We fabbed the exhaust ports out of a 69 Camaro front valance. The rear bumper is also a nearly perfect fit off of a 69 Camaro. There will be an actual steel 1/4” x 2” x 2” bumper behind the roll pan.

If you look close...you can still make out the Phillips 66 logo on the rear 1/4 panel.
 

Attachments

  • 38F51C44-6B19-4540-AFF8-280B143866E0.jpg
    38F51C44-6B19-4540-AFF8-280B143866E0.jpg
    81 KB · Views: 92
  • 08E22ADA-C9EE-4DF1-AA17-6ACA035E02FE.jpg
    08E22ADA-C9EE-4DF1-AA17-6ACA035E02FE.jpg
    81.3 KB · Views: 90
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Here I was thinking the project was done years ago, and the thread pops back up lol. Best looking lowered bronco I've seen IMO, love the 32V 4.6. Some people don't like them, its one of my favs. Had an 03 Mach 1 and an 03 Cobra, love the sound and the way they pull. That exhaust is pretty slick on your Bronco, keep it up. Any ideas on paint?

Keeping the patina for now. Gotta get this one going for car season. I have another Bronco project...and a few other non Bronco surprises up my sleeve.
 
Top