• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

More Full width questions??

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
okay but why would someone move the coil buckets up in order to put longer coils in? I understand moving them out for a f/w, but I don't see why you want longer coils w/out any gains in lift.
 

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
So if I have 3.5" coils now raise my buckets 2" and put in 5.5" coils I will gain more droop? Hmmmm....First I need to fix my shocks from limiting my droop.
 

dieselracer

Full Member
Joined
Mar 7, 2008
Messages
210
Loc.
Citrus Heights, CA
Does somebody have a picture of the 78 cast wedges? I always thought that the wedges were on the axle tube nowhere near the pumpkin or inner "C" 's. Did Ford cast the wedges onto the tube somehow? I don't get it. Wouldn't you just be able to cut them off with a cut-off wheel?
 

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
I just did a 78 D44 and they were only welded at the top and bottom of the wedges. Came of w/ a cutting wheel in around 30 min.
 

Bronco73

Contributor
Bronco Guru
Joined
May 29, 2003
Messages
3,016
Loc.
Cape Coral, FL
I just did a 78 D44 and they were only welded at the top and bottom of the wedges. Came of w/ a cutting wheel in around 30 min.

That is not a 78/79 D44 HP axle from a bronco or F150 truck. That axle came from a 77 and earlier truck. The earlier trucks had the weld on wedges (<>).

There are some pictures in my old thread of the 78/79 with cast wedges.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
The 78-79 series axle wedeges are cast - which means there is NO axle tube under them - truy and cut them off and your axle will fall apart. The 77 and earlier axles are welded on and have an axle tube under them - these are the common axles you see people cut the wedges off and move.

Somewhere I've got a set of those wedges ground down to fit a D60 axle - didn't end up using them, not sure if my dad ever will either...
 
Top