• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Msd ignition question?-

Amelie

Jr. Member
Joined
Feb 25, 2005
Messages
106
Anyone used this product?-
MSD Ignition*Street Fire Capacitive Discharge Ignition with Rev Control - 4-, 6- and 8-Cylinder
 

DonsBolt

Bronco Guru
Joined
May 5, 2005
Messages
5,249
Loc.
Chestnut Hill, Mass
If your talking about a 6AL box
then yes I run one, along with a MSD pro billet distributor

A bunch of us run MSD stuff
some like them, others not
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
I think there are a few here using the "Street Fire" stuff. Been awhile since I heard the name mentioned though. You might do a search and see if anything comes up. If you haven't already that is.
S.F. line is MSD's more budget-minded offering. Been around for just a couple of years I think. Not sure when they started marketing the name, but that's probably close.
You never know just what a company does to save a little in the cost department. For all we know it's the same exact components as their high-line stuff, but with a different decal. Could also be just less expensive, more seldom tested stuff, sourced from cheaper vendors.
Hard to say if it's going to be better, worse, or just the same as the MSD branded stuff, but if the price is right...

Like Don said, TONS of people using the basic MSD products. Seems to be about half-and-half right now as to whether they like it or not. They work well when they work, but some have had them fail often enough to warrant a mention. Still others are running them for 20 years with no issues.

Not the answer you were looking for perhaps, but that's how it's been going lately it seems.

Good luck.

Paul
 

NC-Fordguy

Bronco Guru
Joined
Jan 30, 2006
Messages
1,317
Loc.
Bethel/Greenville NC
The street fire is in the "5" series of boxes. It's good for stock to moderate applications. For a 4x4 Bronco it should be fine.

I've been running msd stuff on my bronco for years without issue. Your results may vary.

I do highly recommend using the msd isolators when mounting a box
 
Top