My Build, 1975 2-into-1

[rmiller747]

Looking good. And yes as others stated.....sheet metal work and then some

 

[reynard101]

Bronco porn... At the 2014 AZ Stampede. Creeping around in the early morning. I'll post more later in the stampede pic thread.

 

[reynard101]

So slow...

New corner (not welded on yet) and took skin off driver door. Got my Centech wiring harness that I won a discount for!

 

[reynard101]

Well my welder was borrowed. Thought I'd clean up a little. Decided to put the tub on the frame to clean up and get some holes cut for the transmission and transfercase. I didn't have much help so it was like moving a stone for the pyramids. Luber...

In process...



Finally on...



my helper...

 

[reynard101]

Core support, inner fenders, and wheel wells mocked up.

 

[reynard101]

A little more done. Old fenders and grill on loose. Driver door skinned. Hood just set on.

 

[Ohio Bronco 21]

It helps to see it look somewhat like a Bronco. Keep it up.

 

[Teal68]

If the work you have done is any sign of what's to come it's gonna look great! It'll be worth the wait.

 

[reynard101]

New Fenders and Grille. Hope to save the hood, no rust, but one ugly dent in passenger rear corner. And Tailgate, not a good tailgate, rusty bottom tailgate. Lots of little stuff to do - radiator brackets, align everything, weld front together, grind welds on floor pan, finish windshield hinge mounting.

 

[reynard101]

Installed a 25,000 BTU AC unit on the garage. Should be cool (and dry) enough to work on a bit this summer.

 

[zonian]

Keep it up, great progress......

 

[reynard101]

AC makes it nice in the garage. Aligning panels. Installing radiator mounts to align fan with 2" body lift.

 

[reynard101]

Radiator mocked up. Need some bracing due to relocation for the 2" body lift.

 

[70_Steve]

Radiator mocked up. Need some bracing due to relocation for the 2" body lift.

How did you get the Bronco balanced on the core support???

 

[reynard101]

How did you get the Bronco balanced on the core support???

It's not easy, involves a couple bottle jacks, a bunch of cinder blocks, and 3 good 2x4s. That's probably why this build is taking so long.

 

[reynard101]

ADHD moment... Hunting in the front yard

 

[reynard101]

Radiator shroud extension.

 

[reynard101]

Some shocks installed.

 

[reynard101]

A little body shimming to get the doors aligned. Flares on. Measure once cut twice.

 

[reynard101]

A little trimming to perform, 1.5" inside the line.