My coyote nightmare

[Hemmer]

Messing around with places for the computer. It really can only go one place. I think BC mounts it on the other side of the fender well(so above tire outside). Not a huge fan of that idea. I heard the battery shouldn’t be close to the computer. Not sure will call ford tomorrow and let you all know.


Sent from my iPhone using Tapatalk

 

[rguest3]

That's the same location that I am considering. I Mocked it up there and everything fit well and will look pretty clean. Makes it easy to mount Power Distribution box on passenger side Firewall too.

 

[Hemmer]

Looks like the starter will not fit. Or even close. I’ll be sending it back and buying one that I can clock.


Sent from my iPhone using Tapatalk

 

[rguest3]

Call PowerMaster Directly to get the one I listed in post #1 of my parts thread. Powermaster 9132. If I remember correctly it was $165.

 

[Hemmer]

https://www.summitracing.com/parts/pwm-9132

I think it’s this one ?


Sent from my iPhone using Tapatalk

 

[rguest3]

That is the same one. I really don't think I paid that much when it was first available......

 

[American180]

That is the same one. I really don't think I paid that much when it was first available......

That jumped for sure. I was pricing them out at $179 or so. I knew I should have bought it.

 

[American180]

F150? thanks!

Yeah Jamie, it has to be F150 4X4.

 

[Hemmer]

Jeggs has starter for 166. It looks like


Sent from my iPhone using Tapatalk

 

[Hemmer]

Messing around with some wire ideas


Sent from my iPhone using Tapatalk

 

[Hemmer]

Had the column cut down hope it’s not to short.


Sent from my iPhone using Tapatalk

 

[Hemmer]

Got the Dakota digital gauge in. Not impressed with the look at all. I wanted more for 1300 bucks plus another 100 for the odb 2 connector. Think I’ll return it for the black version.


Sent from my iPhone using Tapatalk

 

[Hemmer]

Just an update


Sent from my iPhone using Tapatalk

 

[Hemmer]

My 6r80 controls pack doesn’t have very many wires on the odb plug does anyone know what info it actually shares through this plug?

Sent from my iPhone using Tapatalk

 

[Hemmer]

Booster hitting engine

Sent from my iPhone using Tapatalk

 

[mlogan24]

Booster hitting engine

Sent from my iPhone using Tapatalk

More body lift and/or hydroboost?

 

[Hemmer]

I have a 2in lift. I’ll prob try moving the engine over a little bit. Was planning on hydro boost later on. But maybe.

 

[rguest3]

Hemmer - How much body lift do you have?

You will need at least 2" Body lift with that style of Bracket / Booster.

The Inline Bracket over the Driver's Side Inner Fender will work with a 1" body Lift. I did this with Hydroboost. (Pictured) The lower left edge of the bracket had to be radiused to clear.

 

[Hemmer]

I have a 2im body my engine is almost touching the firewall so I don’t know if the hydro boost would even fit. I have to modify my firewall to make room for the censors on back of engine

 

[rguest3]

Is the transmission already installed as well? Motor tilted too far back?