• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need body part suggestions.

nsdq3

New Member
Joined
Sep 4, 2017
Messages
39
Going to need to buy a lot of replacement metal soon. All the usual hot spots (floors, floor support, kick panels, inner fenders, inner and outer rockers, and unfortunately front door posts)

I know no one wants to bash vendors, so I would really appreciate those who have had positive or negative personal experience with the sources for these parts. Toms, Wild horses, LMC, Bronco Graveyard, Dennis Carpenter, Dynacorn and any I'm forgetting.
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
A lot has to do with the area they are in. Shipping cost are very expensive. About 90% of the aftermarket parts are going to need some tweeking to fit. I got mine at JBG and the fit was mediocre. If they are within driving distance that is the way to go. Ken
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Exactly on shipping! I used the two on the west coast about ten yrs ago and minor tweaking was all I needed to do.

I think a lot of problems on new metal occur with the quality of the Doors and fenders.
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
My personal experience, if I had to do it all over again, would be to save my money and get aftermarket parts instead of the "Ford OEM stamped" parts. I paid extra for any part that was offered up as OEM stamped, but had to work them all anyway. Of all my parts purchased, (everything in front of the cowl, rockers in/out, PS kick panel and door post, and DS floor) the only ones I didn't have to work were the core support and the inner fenders.

As others have stated - shipping is $$$. If you can, buy everything you need and have them ship it on a pallet, delivered to a business with a dock, and pick it up from there, even if that means you might pay a little more for some parts compared to another vendor. You'll save overall. Also, while the vendors have decent rates, when it comes to a pallet have them check with USHIP.com. I use that at my business and save a lot on pallet shipping. I just shipped a standard pallet, 6 feet tall, 400 lbs, for $98 Scottsdale to Los Angeles.
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I'm not suggesting one vendor over another because I use them all.....BUT

Body panels are not mass produced so all the vendors are getting them from the same 1 or 2 suppliers. None of the reproduced metal is a perfect fit. Expect to "tweek" on every one. I spent 8 hours per front fender getting them "perfect".

Dennis Carpenter has flat rate shipping. I got both my fenders delivered for $14 total shipping where others wanted $60 each.

Tim
 

Capt.junk&crap

New Member
Joined
Feb 24, 2016
Messages
48
Loc.
Bristol
Just like everyone else, I have used them all. But now I only use one and that is Dennis Carpenter, hands down. Price, quality, shipping and customer service. Plus, for big stuff they are sort of close. I actually bought something from another vendor recently that was having a sale with free shipping and it came drop shipped from Dennis Carpenter.
 

needsmoarturbo

Full Member
Joined
May 13, 2015
Messages
278
Haven't used them yet, but cj pony parts sells most of the usual parts and they claim free shipping, not sure if that applies to large body parts or not?

Sent from my Moto G (5) Plus using Tapatalk
 
OP
OP
N

nsdq3

New Member
Joined
Sep 4, 2017
Messages
39
thanks to all. I have a friend that works on F100s, he likes dennis carpenter as well.
 

STalon89

Full Member
Joined
Oct 15, 2016
Messages
311
Haven't used them yet, but cj pony parts sells most of the usual parts and they claim free shipping, not sure if that applies to large body parts or not?

Sent from my Moto G (5) Plus using Tapatalk

My only advice is to check your parts for damage right away and fitment. Ive had poor luck with a lot of my stuff from them.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Going to need to buy a lot of replacement metal soon. All the usual hot spots (floors, floor support, kick panels, inner fenders, inner and outer rockers, and unfortunately front door posts)

I know no one wants to bash vendors, so I would really appreciate those who have had positive or negative personal experience with the sources for these parts. Toms, Wild horses, LMC, Bronco Graveyard, Dennis Carpenter, Dynacorn and any I'm forgetting.

I pretty much always go with TBP Cost and Quality..
 
Top