• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need Pics Of Tubed Front Cliips!!!

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,264
So my simple install of just building hoops and a cross over bar to install my coil overs has lead to replacing my hacked up core support and inner fenders. So........I'm looking for ideas along these lines......
 

Attachments

  • coil over.jpg
    coil over.jpg
    169.7 KB · Views: 103
  • coil over VI.jpg
    coil over VI.jpg
    105.9 KB · Views: 154
  • coil over V.jpg
    coil over V.jpg
    80.4 KB · Views: 86
  • coil over IV.jpg
    coil over IV.jpg
    86.6 KB · Views: 84
  • coil over III.jpg
    coil over III.jpg
    138.4 KB · Views: 82
  • coil over II.jpg
    coil over II.jpg
    158.7 KB · Views: 77
Last edited:

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,413
Crab - check out my build thread (link in my sig). It's a narrowed front end though. We made it removable too so that it will be easy to work on the motor etc later on.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
this belongs to one of our locals. i'm still thinking about doing mine along these lines some day.
 

Attachments

  • DSCF0861.JPG
    DSCF0861.JPG
    78 KB · Views: 52
  • DSCF0860.JPG
    DSCF0860.JPG
    101.1 KB · Views: 40
  • DSCF0858.JPG
    DSCF0858.JPG
    128.5 KB · Views: 72
  • DSCF0857.JPG
    DSCF0857.JPG
    121.4 KB · Views: 60
  • DSCF0856.JPG
    DSCF0856.JPG
    126.4 KB · Views: 54
  • DSCF0855.JPG
    DSCF0855.JPG
    120.4 KB · Views: 47
  • DSCF0854.JPG
    DSCF0854.JPG
    133.6 KB · Views: 68
  • DSCF0853.JPG
    DSCF0853.JPG
    121.8 KB · Views: 78
OP
OP
crab

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,264
hey 73stallion,
like the battery idea......how did you mount your push rod on your hydro boost to the pedal?
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
it's not mine, it's broncow's. i didn't look under his dash at it, sorry. i liked the battery idea too, but you lose your space for the heater box.
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,263
Here's a couple.....
Sorry, kind of small. I did it so that the tubing suporting the sheet metal was still mounted to rubber mounts. the body is still isolated from the frame.
 

Attachments

  • P9080007s.jpg
    P9080007s.jpg
    246.2 KB · Views: 57
  • P7020099.JPG
    P7020099.JPG
    126.1 KB · Views: 43
  • P8080085.JPG
    P8080085.JPG
    240.2 KB · Views: 49
  • P7030102.JPG
    P7030102.JPG
    122.4 KB · Views: 73
OP
OP
crab

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,264
Thanks guys. That's my plan, mounting the tube back to the body mount like Jon mentioned.
Had a couple hours tonight to work on it. Cut off the old Duff shock hoops and removed the coils. Had to remove my Cage arms to refab the POS Ballistic dana 44 shock tabs and assure a good weld. Got the arms back on and ready to cut off the upper spring bucket and start fabbing the new hoops. Right now, I just want to get this thing back together asap, so probably just going to repair the front body mount supports to get me through another season. After researching tubbing the front clip, I might as well narrow it at the same time. So that part will be delayed for now.
Forgot the camera, but I'll get some pics next time.
Keep the pics coming........Thanks........Crab
 

regshawn

Bronco Guru
Joined
Feb 23, 2006
Messages
2,597
Loc.
Portland
You don't have time to work on your own Bronco, your supposed to be building cages and the like!!;D
 

sstlaure

Bronco Slacker
Joined
Jun 7, 2004
Messages
1,881
Here's mine - totally removable
 

Attachments

  • 071307 Fender mounts.JPG
    071307 Fender mounts.JPG
    125.5 KB · Views: 22
  • 071307 Core support.jpg
    071307 Core support.jpg
    123 KB · Views: 23
  • 071307 Core support & front end.JPG
    071307 Core support & front end.JPG
    183.1 KB · Views: 35
  • 070907 Pass fender rear strut.JPG
    070907 Pass fender rear strut.JPG
    155.8 KB · Views: 37
  • 070907 Pass front iso (2).JPG
    070907 Pass front iso (2).JPG
    181.2 KB · Views: 37
  • 070907 Drvr front iso.JPG
    070907 Drvr front iso.JPG
    118.2 KB · Views: 37
OP
OP
crab

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,264
You don't have time to work on your own Bronco, your supposed to be building cages and the like!!;D

Caught! I figure I better get my stuff taken care of before cages get off the ground again. Got to keep yourself happy first or what's the point I always say.......;D
 
Top