• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New brake kits

OP
OP
toddz69

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Interesting thread. I’m build a new race truck. Stock D44 front axle. Any suggestions for brakes? Limited to 15” wheel for Pioneer class. I’ve found EEC Yellow pads make a huge difference no matter the application. Thanks, Mark


Sent from my iPhone using Tapatalk
I'd keep running the Ford or GM calipers you probably already have, Mark, and run the EEC Yellow pads. It'll work just fine.

Todd Z.
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
Hi guys. I'm one of the founders of Huge Brakes. I'm glad you guys are talking about us. I'm really interested in your feedback and thoughts. I have an 84 and my partner has a 73 and we spend a lot of time on our rigs and see many of the same things you guys do when wrenching away. We are looking for people like you to give honest feedback (good or bad) on our kits. We're looking for people who post on this site to install them and post reviews and we are offering a discount to a limited number of people to do just that. If your interested, email reviewer@hugebrakes.com and we'll send you the details.

If you have questions you can post email us directly at info@hugebrakes.com. I'm going to monitor this thread going forward so you can ask me directly here, too.

FWIW, the T-bird caliper is the best option for the money under 15" wheels. Those pistons are huge and almost make up for the small rotor. They are thirsty, though, so make sure you get a large enough MC. You don't have to get the Duffs, but if you get an off the shelf set make sure you clearance the caliper for the banjo bolt or find a hose end that clears the lip.
 
Last edited:
OP
OP
toddz69

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Hi guys. I'm one of the founders of Huge Brakes. I'm glad you guys are talking about us. I'm really interested in your feedback and thoughts. I have an 84 and my partner has a 76 and we spend a lot of time on our rigs and see many of the same things you guys do when wrenching away. We are looking for people like you to give honest feedback (good or bad) on our kits. We're looking for people who post on this site to install them and post reviews and we are offering a discount to a limited number of people to do just that. If your interested, email reviewer@hugebrakes.com and we'll send you the details.

If you have questions you can post email us directly at info@hugebrakes.com. I'm going to monitor this thread going forward so you can ask me directly here, too.

FWIW, the T-bird caliper is the best option for the money under 15" wheels. Those pistons are huge and almost make up for the small rotor. They are thirsty, though, so make sure you get a large enough MC. You don't have to get the Duffs, but if you get an off the shelf set make sure you clearance the caliper for the banjo bolt or find a hose end that clears the lip.
I presume you're not running these brakes on the '84 since those knuckles are different and would require you to chop off the caliper ears in hopes of making something work?

Todd Z.
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
I think the T-bird and the caddy rears most people use makes a goofy bias. Stops fast though.
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
Todd, I don’t have anything at the moment. Axle a bare housing when I got it from Dan. Any of the kits you prefer? Looking for reliability primarily. EBC yellow are awesome!


Sent from my iPhone using Tapatalk
 
OP
OP
toddz69

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Todd, I don’t have anything at the moment. Axle a bare housing when I got it from Dan. Any of the kits you prefer? Looking for reliability primarily. EBC yellow are awesome!


Sent from my iPhone using Tapatalk
No strong preference from me either way - I've run both the Ford and GM stuff. GM D52 calipers have a larger selection of pads available if that's critical. At one time they didn't offer EBC Yellow pads for the Ford calipers but it looks like they do now.

Todd Z.
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
From memory BMC69 told he that he used a dual piston caliper for a 70's model F250-350 once on one of his builds.
I thought it was interesting but never pursued it myself and I don't think I have ever seen anyone do that before?
 
OP
OP
toddz69

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
From memory BMC69 told he that he used a dual piston caliper for a 70's model F250-350 once on one of his builds.
I thought it was interesting but never pursued it myself and I don't think I have ever seen anyone do that before?
That's the big 2 piston Dayton calipers setup - used on a lot of the 2WD Twin-I-Beam trucks and also on the 3/4-1 tons 4WDs starting in '76. I messed around with them a bit about 12-13 years ago myself. You could still occasionally find the brackets in the boneyards in those days (with the familiar caliper-retaining screw broken off in the bracket :)). They required at least a 16" wheel too. JP Magazine did an article on a conversion using them that used the rotor featured in the kits mentioned in my OP in this thread, except that they not only opened up the center hole but turned down the OD as well. That was a little too much for me. Plus the Dayton calipers have a reputation (at least online) of some 'stickiness' (either the pistons themselves or with the caliper movement, I don't recall which) that made it not super desirable for me. I also felt like the brake bias was probably a little too far off for me with those calipers. The caliper brackets are desirable for the guys using them on F250 front ends, etc. so I had no problem getting my $$ back when I purged all those pieces from my R&D inventory.

Todd Z.
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
I presume you're not running these brakes on the '84 since those knuckles are different and would require you to chop off the caliper ears in hopes of making something work?

Todd Z.
I did a SAS a couple of years ago using a 78/79 D44HP. These brakes fit just fine!

We don't have a solution for the TTB (yet) but I really want to solve that problem. As you point out, the cast in slider mount is problematic and you can't swap the knuckle due to camber differences. We're considering an option to grind off the mounts from the knuckle and doing a core swap for the knuckles when you buy the kit. The TTB kit is highly requested because the T-bird calipers don't fit without clearancing the knuckle for the banjo bolt so options are limited.

We are also looking at options for the D60 that would use opposing 4 piston calipers and 14" rotors. We have the parts, but the kit would be spendy and we just don't know whether people would want to upgrade. The D60 twin piston's are already pretty good.
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
I think the T-bird and the caddy rears most people use makes a goofy bias. Stops fast though.
I like the Wilwood 4 pot rear kit that Moser sells. Nice size rotor, internal parking brake drum, and it's bolt on. Good balance compared to the T-birds. More brake torque than the Explorer setup. I have heard enough complaints about the El Dorado calipers that I never bothered with them (they are popular though).
 
OP
OP
toddz69

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I did a SAS a couple of years ago using a 78/79 D44HP. These brakes fit just fine!

We don't have a solution for the TTB (yet) but I really want to solve that problem. As you point out, the cast in slider mount is problematic and you can't swap the knuckle due to camber differences. We're considering an option to grind off the mounts from the knuckle and doing a core swap for the knuckles when you buy the kit. The TTB kit is highly requested because the T-bird calipers don't fit without clearancing the knuckle for the banjo bolt so options are limited.

We are also looking at options for the D60 that would use opposing 4 piston calipers and 14" rotors. We have the parts, but the kit would be spendy and we just don't know whether people would want to upgrade. The D60 twin piston's are already pretty good.
Aha - that little detail explains it all :). Desolate's new kit for the TTB 44 sounds similar to what you might be proposing:

https://desolatemotorsports.com/shop/suspension/front-suspension/big-front-brake-kit/

Todd Z.
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
Aha - that little detail explains it all :). Desolate's new kit for the TTB 44 sounds similar to what you might be proposing:

https://desolatemotorsports.com/shop/suspension/front-suspension/big-front-brake-kit/

Todd Z.
Hadn't seen that before. Thanks for pointing it out. Yes, their kit requires you to grind off the mounts.

I like Desolate. They make high quality parts. I've bought from them and I would buy from them again.

That being said, it looks like they are using the Wilwood forged superlight internal calipers. Even if they are using the largest piston version, it's only 5.18 square inches of surface area. With 13" rotors that isn't going to give you as much brake torque as the T-bird calipers (with 7.52 square inches of surface area) on the stock 11.7" rotors. Not accounting for pad deformation, though. Frankly, those T-bird calipers are hard to beat on the stock rotor. They put out about as much brake torque as a new Bronco's front brakes.
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
DVF makes a nice kit as well, using the same wilwood parking brake as my 240z.
 

Attachments

  • 241188399_1032807367520844_4732134109788412698_n.jpg
    241188399_1032807367520844_4732134109788412698_n.jpg
    146.2 KB · Views: 91

ksagis

Contributor
Aspiring Bronco Guru
Joined
Jun 15, 2020
Messages
819
Loc.
Austin
Anybody have opinions of how piston area, pad area, and rotor diameter / pad application radius are related?

My guess for a given piston diameter and pad application radius, increased pad area would be goodness, even if that reduces psi across the pads?

I was was to rank importance, maybe piston area and radius from axle centerline are most important, and pad area less so for a reasonably sized pad?
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
so these calipers are from a dodge ram?
Sort of. The caliper in our base kit is 2018 Ram 1500. The slide bracket portion of the caliper is not. You can rebuild it with the standard 2018 Ram 1500 pistons or replace that portion entirely with an off-the-shelf part. The upgraded kit has a caliper that is similar to a Ram 1500 and uses the same pad but it has larger pistons and it’s made by Teraflex so it doesn’t use the standard Ram 1500 rebuild kit.
 

LittleBeefy

Huge Brakes - www.hugebrakes.com
Joined
Aug 1, 2023
Messages
67
Anybody have opinions of how piston area, pad area, and rotor diameter / pad application radius are related?

My guess for a given piston diameter and pad application radius, increased pad area would be goodness, even if that reduces psi across the pads?

I was was to rank importance, maybe piston area and radius from axle centerline are most important, and pad area less so for a reasonably sized pad?
You probably aren’t going to like my answer because it is pretty confusing and it will leave you with more questions but here goes. Brake torque is directly related to clamping force, the coefficient of dynamic friction (assuming the rotors are turning) and the radial distance of the clamping force from the center of rotation. All three are multiplied together to get the braking torque. Pad size isn’t actually in the calculation. The difference between pads is basically the coefficient of dynamic friction (represented by the Greek character Mu in the calculations) which varies from around .3 to .5 based on what material is used. As you pointed out, bigger pads are distributing the clamping force over a larger area but the net force of the pad on the rotor is still the same regardless of pad size because the force is determined by the surface area of the back of the piston and the PSI inside the caliper itself. Pads with a higher coefficient of friction will stop faster but they create more heat and wear out faster (generally). Larger pads will last longer than smaller pads given the same piston size and rotor dimensions. Essentially, as long as the pad is big enough to accept the force generated by the piston, size of the pad isn’t really relevant in braking torque.

More info on the basic calculations can be found here: https://www.altraliterature.com/-/m...rque (Tb) is the,is the effective disc radius.
 

ksagis

Contributor
Aspiring Bronco Guru
Joined
Jun 15, 2020
Messages
819
Loc.
Austin
You probably aren’t going to like my answer because it is pretty confusing and it will leave you with more questions but here goes. Brake torque is directly related to clamping force, the coefficient of dynamic friction (assuming the rotors are turning) and the radial distance of the clamping force from the center of rotation. All three are multiplied together to get the braking torque. Pad size isn’t actually in the calculation. The difference between pads is basically the coefficient of dynamic friction (represented by the Greek character Mu in the calculations) which varies from around .3 to .5 based on what material is used. As you pointed out, bigger pads are distributing the clamping force over a larger area but the net force of the pad on the rotor is still the same regardless of pad size because the force is determined by the surface area of the back of the piston and the PSI inside the caliper itself. Pads with a higher coefficient of friction will stop faster but they create more heat and wear out faster (generally). Larger pads will last longer than smaller pads given the same piston size and rotor dimensions. Essentially, as long as the pad is big enough to accept the force generated by the piston, size of the pad isn’t really relevant in braking torque.

More info on the basic calculations can be found here: https://www.altraliterature.com/-/media/Files/Literature/Brand/twiflex-limited/Catalogs/p-1648-tf-a4-sections/p-1648-tf-a4_braking_calculations.ashx#:~:text=Braking Torque (Tb) is the,is the effective disc radius.
Makes sense, pad area effectively washes out and is second order. Piston area and radius from centerline dominate. Thanks for reply!
 
Top