• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

new steering column shift collar install question

laidbback

Jr. Member
Joined
Oct 3, 2008
Messages
71
Loc.
Los Angeles
I bought a new shift collar and I need to get the old one over the indicator cluster. I don't want to cut the wires there and have a bunch of connectors right behind the indicator cluster. I disconnected the wires down below but they will barely slide through the small hole in the column. Any suggestions, I feel like if I force them out then they will never go back down the column.

Any way around the instrument cluster to get the new shift collar or shift lever hub as it's labeled here http://www.tomsbroncoparts.com/images/schematics/pdf/SteeringColumn.pdf installed.
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
Pull one or a couple out at a time. They'll go back in, it can be a pain in the ass though. I just changed my turn signal switch and had to take the column apart to fish the wires through. Oh what great fun!
 

7elk

Sr. Member
Joined
Feb 13, 2006
Messages
369
Loc.
Albuquerque
I agree with Mark. I have done it a couple of times and it is a time consuming job. Mark on a piece of paper the pin location and remove the wires from it.Then slide them up the column. put back together and away you go.
 
Top