• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

new third member yoke question

m_m70

Contributor
Bronco Guru
Joined
Jun 14, 2001
Messages
1,770
Loc.
Prescott AZ
going to buy an assembled third member from one of our vendors but it doesn't come with the yoke. Quick question is when putting the yoke on the shaft does it get torqued or does it have to be set up with the nut that holds the yoke on??

Thanks
Mike
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Strange that it wouldn't come with a yoke. To me that's an integral part of the setup.
But then I'm no expert either. Subscribed anyway to hear what the experts say.

And yes to the torque and yes to the nut. You torque the nut down on the yoke as part of the assembly. Either on a crush-sleeve, or a solid sleeve collar that's coming back into vogue it seems.

Paul
 

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
Some third members don't come with a yoke simply due to the variations in u-joint size, and it's simple to set up once you have the proper yoke. What some vendors will do is set up their third members with a solid preload spacer. The solid spacer will allow you to throw on your yoke and simply torque to spec. If they send you a third member with a crush sleeve and no yoke, I would highly question their standards as a drivetrain builder.
 
Top