• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Newport wiper assembly?

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
That looks similar to my wiper setup. Tom's sold a kit years ago, can't remember who made it. Works good, I would like an intermittent delay switch though.
 

tatersalad

Bronco Guru
Joined
Jan 17, 2009
Messages
1,067
They look just like the AFI Marine 2 speed wipers I have been using since 95, they work independent of each other like the vacuum ones but all you have to do to make them park together is solder in a general purpose diode. I love mine. WH sells a switch that sync's the two and there is another thread on here about a switch that a member found that also sync's the two.
 
OP
OP
67 Halfcab

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
They look just like the AFI Marine 2 speed wipers I have been using since 95, they work independent of each other like the vacuum ones but all you have to do to make them park together is solder in a general purpose diode. I love mine. WH sells a switch that sync's the two and there is another thread on here about a switch that a member found that also sync's the two.

This system only uses one motor just like the factory electric wipers, but the linkage is enclosed and out of sight instead of out in the open like the factory wipers.
 

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
When I was interning at ICON I found out that they used this wiper system. I never seen it in action but i can say that if ICON used it, it's good enough for me to buy one for my bronco in the future
 

Stingray240cs

Full Member
Joined
Nov 12, 2012
Messages
345
Loc.
Corinth, Texas
I wonder if the Newport single heavy duty motor is similar or the same as the AFI or Ongaro heavy duty motor. If so, my initial concern would be one motor running two wipers. I think I would rather buy the two Ongaro motors and synchronizing Cole Hersee switch. I think it looks cleaner and is sub $300. That's just my opinion though.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Stock setup is one motor almost all stock wiper setups are one motor. They have no issues. About the only time they may work hard is when your pushing snow off the windshield even then for most people thats not a regular occurance.
 

Stingray240cs

Full Member
Joined
Nov 12, 2012
Messages
345
Loc.
Corinth, Texas
Stock setup is one motor almost all stock wiper setups are one motor. They have no issues. About the only time they may work hard is when your pushing snow off the windshield even then for most people thats not a regular occurance.


Right, but these are totally different motors than what came on our broncos. I'm not saying it's a problem though. It just caught my attention when it was using just one marine motor. And you're right, snow is what I was initially thinking of (not really a problem here in Texas), but my thoughts were also that one motor is working twice as hard as two individual motors so would longevity be an issue. Plus, I just think the dual motors looks cleaner. Than that motor sticking out of the center. I'm sure it's fine, I was just throwing it out there.
 

tatersalad

Bronco Guru
Joined
Jan 17, 2009
Messages
1,067
This system only uses one motor just like the factory electric wipers, but the linkage is enclosed and out of sight instead of out in the open like the factory wipers.
Oh, I didn't see that. Similar to early cruisers I guess. I have seen these type offered in hot rod mags also.
 
Top