NP205 speedo gear differences from Dana 20

[nvrstuk]

What if any differences between the 205 gear and the D20?

Will they interchange? I don't have either at the shop so I can't compare...
but I do need a 205 speedo gear assembly to plug the hole in my 205 t-case.

 

[BUCKWILD]

should be the same. my 205 has one out of a tbird for vss. and if i remember corectaly the car one fits the 20 also im sure thats what i had in mine originally

 

[nvrstuk]

...what you're saying is I shouldn't have sold mine last winter! lol

thanks!

 

[Bitch'nBronco]

I took the gear off the 205 cable and it was the same as my D20 gear.

 

[nvrstuk]

Well I've always used the same gear - swapped amongst the six different transfer cases four which blew up over the decades!!

Did I keep one??

Anybody have the gear assembly they would like to sell? Thanks

 

[nvrstuk]

should be the same. my 205 has one out of a tbird for vss. and if i remember corectaly the car one fits the 20 also im sure thats what i had in mine originally

So I should be able to find a speedometer cable assbly from a T-bird and it will fit my 205? This would be nice as I could then run VSS for my Baumann also.

Did you just grab the entire cable assbly from the dash to the speedo output on the t-bird and it slide right in...nice!

Asking because I'll need extra length due to my 4r70 and gear doubler...but maybe an early Ford pickup like EFIGuy mentioned to me yesterday...

 

[Bitch'nBronco]

I used this VSS in my 205 http://www.marshallinstruments.com/products/9222.cfm

 

[EFI Guy]

I used this VSS in my 205 http://www.marshallinstruments.com/products/9222.cfm

Are you using that with the Marshall speedo? I'm not aware of any Ford applications that use a hall effect VSS.

 

[nvrstuk]

Garry, I sent you this link but it came back... I wanted to hear what you had to say...

 

[Broncobowsher]

That looks like a VSS only, no cable hookup.
If all you are after is a VSS (without cable) lots of Fords (cars and trucks) ran it like that. The sensor is the same as far as I can tell, maybe needs a different gear.