• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Nv3550 swap

Hercfe9

New Member
Joined
Sep 24, 2015
Messages
20
Loc.
Point Mugu
Does it matter the year of the nv3550 trans or are ther all the same? Did the jeep cherakee come with a 3550 and if so is it the same as the regular jeep ones. There are some new ones on eBay but I don't want to purchase without knowing for sure. Thanks in advance guys.
 

NC-Fordguy

Bronco Guru
Joined
Jan 30, 2006
Messages
1,317
Loc.
Bethel/Greenville NC
I'm not aware of any Cherokee models having the NV-3550 trannys. Certain year Jeep wrangler and libertys had them. I wanna say 2001 -2005 models but some else more knowledgeable than me on jeep stuff needs to chime in.
 
OP
OP
Hercfe9

Hercfe9

New Member
Joined
Sep 24, 2015
Messages
20
Loc.
Point Mugu
I read also that some of the later 3550s have a 19 spline input shaft. I'm pretty sure I need a 10 spline?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The spline difference is why the clutch disc is not a Ford disc anymore, but one sourced with the correct diameter and spline count. I don't think there is a 10 spline 3550, but never looked for one either.

The input shaft snout size is different as well, which is why A/A makes a new pilot bearing for the install into a Ford.
The clutch cover, throwout bearing and bell housing remain Ford. The disc is different and the pilot is custom. The adapter plate is for the bell housing and you need the adapter for the Dana 20 transfer case, or use a t-case that has the same bolt pattern as the NV trans. Such as an NP205 or 231/241 transfer case.

While I'm not aware of any variations of the 3550, don't just take one off of the internet at face value. Make sure you see pics. There are NV3500's from GM applications with an integrated bell housing, there are still others that are of vague origin that look very similar, have almost identical dimensions but the gear ratios are different (street gearing) the ribbing in the case casting is different and though they might work, they would not be desirable in our EB's.
Lots of sellers don't even know what they have, so it's up to you to know.

Paul
 
Top