AR OCBR 2017 For Sale-Wanted Thread

[JWMcCrary]

I'm about to pull a stock rear fuel tank that should be good. Been sitting for about 5 years inside my shop but we put gas in it and drive it around for a while before it was parked and makeover started.

I've had a few people ask about the tank, I pulled the sender and looked inside and have determined it shouldn't be used. Tossing it.

 

[JWMcCrary]

28 spline mini spool already installed in an open carrier for Ford 9 inch. This is just the carrier, not a complete 3rd member.

$20

 

[Boss Hugg]

I have a complete explorer (2000) motor, that will need a rebuild, bore is standard can have it miked. 4r70w awd needs a rebuild. NP205 probably would need a gasket set. also have enough bushings, etc to make a cross member including tubing for the 205. have the shifter also. if you are interested I will price this stuff, send me a pm.

Does it come with harness and pcm?

 

[fordguy]

it does come with a harness, no pcm. the head was pulled and piston removed to check bores. I have the rebuild kit for it. should be an easy rebuild. I can have the bore checked and take a pic of the bore dial reading.

 

[stout22]

I have a buddy that has a pair of new (never used) Sport Bronco script emblems for the fender. He's asking $60 for the pair. They are $36 each from the vendors. Let me know if anyone is interested.

 

[SpareParts]

I have a brand new Super Swamper SSR 35x14.4x15 tire on a black steel 15x10 deadlock wheel, D hole, 5 on 5 1/2" bolt pattern. It was a spare from a Jeep my son got on a trade. He didn't have all the cash so we sold it with out the spare to make it cheaper. $300 is what I want out of it, tire is almost $500 new with out the wheel.

https://www.4wheelparts.com/Tires/S...px?t_c=13&t_s=536&t_pt=101509&t_pn=SSTSSR-28R

I'll get a pic tonight...

 

[Boss Hugg]

I have a brand new Super Swamper SSR...

If you had 3 more I'd give $500 for all of them...??? LOL. ;D

 

[SpareParts]

If you had 3 more I'd give $500 for all of them...??? LOL. ;D

Only if.... lol

 

[JWMcCrary]

One (1) 33x12.50x15 Super Swamper SSR mounted on Eagle 058 Aluminum wheel. Wheel is 15x10 with 3.625 backspacing. It has never been on the ground, all it's done is ride around on the tire carrier and hasn't done that in about 5 years. Been stored inside.

$150

Here's some current pics, never been on the ground. Tire alone costs over $300

 

[JWMcCrary]

I need front turn signal assemblies, clear or amber doesn't matter, just decent shape and useable as is. All I have is what you see in the pic, which is nothing.

 

[SpareParts]

Maybe I'm overpriced on mine? 36" Swamper... make reasonable offer?

 

[stout22]

Anyone got a good J-shift Dana 20 they want to part with? I may be doing a parking lot swap
Shoot me a PM.

 

[radman74]

15x14 Bart black wheels 5x5.5 200obo
5.5 duff coils used 75 obo
2 bilstein shocks eye to eye 100 obo
Truck avenger carb needs a rebuild 100 obo
Will bring to the park if anybody is interested. Thanks

 

[Banjer Picker]

15x14 Bart black wheels 5x5.5 200obo
5.5 duff coils used 75 obo
2 bilstein shocks eye to eye 100 obo
Truck avenger carb needs a rebuild 100 obo
Will bring to the park if anybody is interested. Thanks

Are the shocks for a 5.5" lift? I'm interested in them if they will work on a 3.5" lift without bottoming out.

 

[radman74]

They were the longest I could buy I have f250 mounts I did run them with the 5.5 springs. I'll measure the shocks full extended and collapsed and let u know.
Thanks

 

[Banjer Picker]

They were the longest I could buy I have f250 mounts I did run them with the 5.5 springs. I'll measure the shocks full extended and collapsed and let u know.
Thanks

Sounds good. Which model are they?

 

[Banjer Picker]

-Sold Fiberglass hood. Unknown manufacturer. Good condition. Has hood pins but appears to never have been installed (no holes in cowl side)- $200 (I am trying to sell this locally first)

-Fuel tank Sending unit- James Duff. Brand new in box: $45.00

-SOLD Plastic rear fuel tank and new steel strap to fit 66-76 bronco. $50

-Corbeau sliding seat bracket. Only used one year. Won't fit the Baja SS style seat- $65

-'89-'93 Mustang 5.0 valve covers (yes one is lime green)- $15

-C6/205 out of a big bronco (selling for a friend) - make an offer

-May have a hard top in decent condition for sale. That's TBD at the moment.

You have to IM me with your email address for pics. Apparently I let my membership expire.

 

[SpareParts]

-Fiberglass hood. Unknown manufacturer. Good condition. Has hood pins but appears to never have been installed (no holes in cowl side)- $200 (I am trying to sell this locally first)

I'm interested in the hood... text pics if you would to 314-803-6917 or email me sparepartseb@gmail.com.

 

[Youngs Automotive]

I'm searching for a drivers door that's in good condition
Can be a bare door. Or a damaged door with good
Window frame on me or text me
918-805-2497

 

[Boss Hugg]

Anybody in need of a Dana 30? Includes the value added option of dirt and rusted drums. Make an offer. Not sure about gear ratio. It has no tag.

Sent from my iPhone using Tapatalk