AR OCBR 2017 For Sale-Wanted Thread

[LUBr LuvR]

Is the sending unit for a front or rear tank? And is the rear tank out of a '77 or aftermarket? I may be interested in both, if you can ship?

 

[Banjer Picker]

Is the sending unit for a front or rear tank? And is the rear tank out of a '77 or aftermarket? I may be interested in both, if you can ship?

The tank is actually sold. Sending unit is for a rear tank. Still available.

 

[sprdv1]

The tank is actually sold. Sending unit is for a rear tank. Still available.

Be seeing y'all soon brother man

 

[JWMcCrary]

Looking for a park brake pedal assembly if anybody has one in decent shape. Also need the pieces that connect the front cable to the rear cables, however those are available from JBG.

 

[JWMcCrary]

I have a stock Bronco PS box, I think its a 6 turn, not sure. It worked fine the last time the vehicle was driven that it came off of and it didn't have any noticeable leaks but it's covered in dirt/oil/fluid. I took it off and replaced with one that I had already tapped for ram assist. Pittman arm is still on it but the nut/washer is not.

$350

If you want the stock PS pump it can go with it.

 

[stout22]

I think I have a park brake assembly. Probably doesn't have rubber on the pedal but maybe. I'll try to check tonight if Irma isn't raining cats and dogs here.

 

[JWMcCrary]

I think I have a park brake assembly. Probably doesn't have rubber on the pedal but maybe. I'll try to check tonight if Irma isn't raining cats and dogs here.

Thanks Rodgers but I already have somebody bringing me one.

 

[fordguy]

Never been used Bc bronco efi internal pump tank with fuel pump 450.00 delivered if I can make it to ocbr. I have it mounted but never had fuel in it. Pump is used with a new sock.

 

[stout22]

Didn't realize there are 2 styles of parking brake brackets till I looked at what I have. Guess the design changed in 76. I have one of each.

 

[Banjer Picker]

Be seeing y'all soon brother man

Looking forward to it brother!

 

[bchesley]

I have the following that I am bringing.

74-75 big bearing medium brake 28 spline shafts
Dana 44 axle shafts (stock)
Drop Pitman arm from Duff
Heavy Duty Track Bar Bracket from Duff (used just a couple of months)

 

[BroncoJAK]

Dynacorn floor

Any one want a new Dynacorn floor pan? This is in my opinion the best part available to restore a Bronco with. Also the most complete. Floor pans, reinforcements, seat and seat belt anchors, inner rockers, even the little bracket for the e brake and speedo cable is included.
$650. Saves you a lot in shipping. Fits 68-77.

 

[BroncoJAK]

Mounted but then the owner changed his mind so they are basically new. American Racing Wheels Teflon coated 17x9. They will come boxed up with centers.
Asking $500

 

[kshinnall]

List of parts I'm looking to sell. Also, only bringing what sells instead of hauling all this to Hot Springs.

Set of new rear 6 pack leaf springs (5 pack with add-a-leaf) with bushing and new U bolts $200 LOWERED PRICE
C bushings with radius arm bushings $25
Stock tracking bar with new bushings $20
Set of 4 Cragar "Soft 8 Silver" steel wheels 15x7x5.5 w/4" back spacing with bolt in valve stems and set of chrome lug nuts(less then 500 miles) $120 LOWERED PRICE
Set of 4 Daytona tires 235/75/15 lots of tread left. Recommend these for trail use of farm use only. $100 (not mounted) SOLD!!
New Rampage tube bumper, no hoop, for 87-06 Wrangler (will fit 66-77 Bronco slight modification) painted silver $100 LOWERED PRICE
2 old school halogen KC lights $50
OEM air cleaner for 302 73-77 $40
Usable stock bumper $25
Stock rear driveshaft, was used till I added lift $40
1" lift blocks $15
2" lift blocks $20

I can send pictures of items. Just send me a PM and I'll text them. Just give me some time since I don't have pictures of all the items on my phone, yet.....

Thanks and looking forward to seeing all the old Broncos!!

Lowered prices on springs, rims and tube bumper. Or shoot me an offer, tires are sold.

 

[Boss Hugg]

Lowered prices on springs, rims and tube bumper. Or shoot me an offer, tires are sold.

do you know if the springs are lift springs or stock?


Sent from my iPhone using Tapatalk

 

[kshinnall]

They are lift springs 2.5" from Bronco Graveyard

 

[Boss Hugg]

They are lift springs 2.5" from Bronco Graveyard

Tempting... I've got 3.5 stuff to go on the front...


Sent from my iPhone using Tapatalk

 

[bigjhoov]

I've got some things I could bring....

EB width 9" housing, 31 spline axles, disc brake kit, no third member. The discs are a little rusty and you'll probably want to install new bearings. $600 obo

Stock '66 t-case shifter, straight. $200

Nice stock chrome bumpers, one has two holes on one end. $100 ea.

Original 16" steel wheels, set of 5. $350

 

[hoj72]

Brand new in box rcv axles and 30 spline internal hub to convert Warn locking hubs to 30 spline outer. Fits full width Dana 44.
(part #CVJ440S-FORD1)

retail for this stuff right now would be $1599 on the rcv site.
$1300 and could have delivered to OCBR

 

[stout22]

For sale:
Set of DIY beadlock kit for 15" wheels. You have to weld them up. $200
Still have the T-18 4 speed with a NP205 transfer case. $200

Need quick response - I'm packing up this evening.