• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ocbr 2018

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
Mine developed a brake leak today. An o ring on the prop valve. I pulled it off and retightened it. It doesn’t look to have room to squeeze out like it was when I found it. I guess we’ll see how it goes tomorrow morning. I’m whooped.

Still gotta pack something resembling clothing and dad’s got some work to do in the morning to get his hired hand something to do tomorrow afternoon and then hopefully we’ll be loading and heading out.


Sent from my iPhone using Tapatalk
 

Fitz24

Bronco Guru
Joined
Jul 4, 2007
Messages
1,299
Did you bench bleed the MC? And have you bled at all the the upstream joints? Air in lines have a way of getting stuckjunctions.


Sent from my iPhone using Tapatalk

Yep, bench bled MC. Bled all points and was not getting any air anywhere. Couldn't figure it out. Was only getting a little pedal about an inch off the floor. I decided to put tires back on and give it a try. Now I feel pretty stupid. Brakes worked great. I was expecting a high full pedal like the old system. I guess that's not the case with this system.

I have to pack some cloths and load up tools, Bronco, etc. Hope to be on the road before noon. That will put me in HS before dark. I hope.
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
Yep, bench bled MC. Bled all points and was not getting any air anywhere. Couldn't figure it out. Was only getting a little pedal about an inch off the floor. I decided to put tires back on and give it a try. Now I feel pretty stupid. Brakes worked great. I was expecting a high full pedal like the old system. I guess that's not the case with this system.



I have to pack some cloths and load up tools, Bronco, etc. Hope to be on the road before noon. That will put me in HS before dark. I hope.



Good to hear. Mine was kinda the opposite. Pedal moved about an inch or two and hard three inches from the floor. Last night it went nearly to the floor before getting hard.


Sent from my iPhone using Tapatalk
 

Fitz24

Bronco Guru
Joined
Jul 4, 2007
Messages
1,299
Well, made it before dark, bareiy. Couldn't find my hand held radio and GoPro equipment. At least i made it.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
And it's still raining and more on the way.

You guys be safe on those trails. It's going to be sloppy

Tim

Wasn't bad at all till Friday late... Most of day Saturday but we got pics in before it set in later in the day...

Had to load up, tie down in the darn rain

Great times had by all
 

Fitz24

Bronco Guru
Joined
Jul 4, 2007
Messages
1,299
Enjoyed getting to seek everyone again. It had been too long. Even with several issues (radiator and fuel pump wire) got to get a little wheeling in. Unfortunately, the rain put a hamper on everything. Grabbed an opportunity Saturday morning when rain was lite and loaded up. Decided to head home to MS and see wife and family for a day before heading back to TX for work on Tuesday.

Can't believe I only took a couple pictures.
 

Attachments

  • OCBR 2018 Group Picture.jpg
    OCBR 2018 Group Picture.jpg
    142.5 KB · Views: 60
  • 2018-09-22 10.21.43.jpg
    2018-09-22 10.21.43.jpg
    109 KB · Views: 53

stout22

Contributor
Bronco Guru
Joined
Dec 13, 2006
Messages
3,019
Loc.
Athens, AL
Rain put a hurt on the group picture. There were a little over 100 Broncos registered from 20 states. We got out and wheeled Saturday and had a good time in the rain. There was more traction than you would have thought.
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
Rain put a hurt on the group picture. There were a little over 100 Broncos registered from 20 states. We got out and wheeled Saturday and had a good time in the rain. There was more traction than you would have thought.

with so much sharp rock, people underestimate. They expected mud, but there's not a lot of clay to be found at the park to make mud. Lots of sand which water runs right thru and that makes traction. It was definitely fun.
 
Last edited:

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Looks like Bulldozer's green bronco in the group picture. Noticed he hasn't chimed in on here in quite some time. He ok?
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Rain put a hurt on the group picture. There were a little over 100 Broncos registered from 20 states. We got out and wheeled Saturday and had a good time in the rain. There was more traction than you would have thought.

Totally agree, was a little shocked it wasn't slicker..
 
Top