• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Old School Anti-wrap Bars

Willowrun

New Member
Joined
Apr 16, 2015
Messages
29
Hi Everyone,

I'm finally moving on to the suspension portion of my '74 Bronco project. The Bronco currently has the full on K Bar S suspension treatment with dual shocks front and rear, about a 2.5" lift, and these bars. While the old K Bar S stuff is cool to look at I will be using this Bronco a lot at the dunes so I made the decision early on to replace the existing springs/shocks with some newer technology stuff in order to improve the ride for the dunes. As I am readying for the spring and shock change I am wondering if I should retain these anti-wrap bars. Old technology or keep them?

full
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Old tech knowlogy, I wouldn’t retain them, I’d go for something from Duff’s or Wild Horses. They work better and do not negatively effect function.
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,518
Those actually work ok on the street, but they will cause more problems than the solve in even marginal off-road use. The spring hanger will start to crack around the mounting bolts, and it will limit travel even if you are using stiff springs from the same era.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
I removed mine and welded up the holes in the hanger. PO had some huge hitch installed that I cut off as well, I think he was towing something that put the Bronco at it limits...
The install was questionable to begin with... see last picture.
 

Attachments

  • IMG_20211217_133046027.jpg
    IMG_20211217_133046027.jpg
    136.7 KB · Views: 127
  • IMG_20211217_140050462.jpg
    IMG_20211217_140050462.jpg
    144.7 KB · Views: 126
  • IMG_20211209_102147762.jpg
    IMG_20211209_102147762.jpg
    126.8 KB · Views: 109

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
If you want some of this modern wheel travel the new suspension has to offer, ditch the old school way of locking up the suspension and go get one of Duff's torque arms.
 
OP
OP
W

Willowrun

New Member
Joined
Apr 16, 2015
Messages
29
Thanks for all of the responses! I'm not anticipating the stock 302 wanting to wrap the new leaf springs so these will get taken off.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Bronco springs of all types actually allow a surprising level of axle/spring wrap.
I finally have a go pro and mount and was going to do a series of videos showing how different springs react different conditions. Just don’t have the time yet.
 
OP
OP
W

Willowrun

New Member
Joined
Apr 16, 2015
Messages
29
I say keep them. I like the nastalgia
Funny you say that as that has been one of my big hang ups all along with this Bronco. Someone obviously spent a lot of time/money on the current suspension system and I'm sure back then it was thought of as state of the art to have dual shocks at all corners and these traction bars. Because of that I've thought about keeping the suspension the way it is and rocking it out old school but I think the first time I take it to the dunes I would be regretting that decision because I'm sure it would ride like a tank. I have Chevy's that ride rough so I'd like to take advantage of the Ford's coil front suspension and get a nice ride out of it with modern springs.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
^^^^
This will make you much happier in the end. I have a front leaf spring build going on now that is getting bronco springs and a 3 link in the front for that very reason, it has to ride and drive as well as my bronco.
 

Bronco4x4

Sr. Member
Joined
Dec 21, 2009
Messages
621
I have those on my 69EB that is mainly street driven. Mine are from Duff and work well. I’m running 35’s with 2 1/2” lift. I’m building a driver 71EB and bought another set. Same lift and they are an easy take off if you change your mind later. It all comes down to how you plan to run the EB. Good luck if you try in the dunes.
 
Top