• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

On board air

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
I'm finally going with ARB's and have yet to decide on what OBA to purchase. I really don't want to run a belt driven setup. It seems like most people all say to go with the one they have because it's obviously the best.

I've heard good things about the ARB twin compressor, but at $520, it should be making me sandwiches. I don't mind if it takes a little longer to air 40's from 10 to 20 psi, as long as it has the ability. I really just need my lockers to reliably work.

What does everyone recommend?
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
I'm running a viair pump with 2 3 gallon tanks under the drivers floor board. Works really well.


Sent from my iPhone using Tapatalk
 

valveamp

Full Member
Joined
May 30, 2011
Messages
287
I have an ExtremeAir Magnum pump that I had on an old Jeep that I since sold, but took off the pump. I haven't installed it on the Bronco, yet, but I plan to in the future. Used it with a2.5 gal tank. It worked very well with the 35s on the Jeep. One word of caution, I initially used a nylon air hose coming out of the pump. Around the 2nd time I used it, the pump head was so hot that it deformed the nylon and caused it to leak. I changed over to copper tubing and that solved the problem. No other problems with that compressor.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Oasis are the best automotive electric oba pumps made.
They will run an impact with no storage tank.
But at their price point they may need to make you sandwiches as well.....lol
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
7cc7e185ae3bf8665398332e7620e1dc.jpg

Viair 45040
087ca12789b4ca1a9fe9a99fb5647975.jpg

And looks like I was over eat. On the tanks. 2/gallon tanks.


Sent from my iPhone using Tapatalk
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
6f8be0d42ee30d666277c64a613aa693.jpg
ignore the master. Converting to hydroboost. But small footprint under the hood as well.


Sent from my iPhone using Tapatalk
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
I went to E-Bay & checked out those VIAIR units .. I saw a couple I'd like to give a try but they say use only on a ONE Gallon TANK. I have a 12 gallon tank in my Bronco & I want mine to be able to cut on & off as I drive to keep the tank full. The adds said It doesn't cycle .. Are there units that will cycle & fill a bigger tank.
.. I'd bought a little unit from Harbor Freight & I would cycle but the hose leaked & it's fitting was a crimped unit. But I could flip the switch to it & while driving in my pasture it'd fill my 12 gallon tank to about 70lbs. But the Harbor Fright unit takes about 20 minutes to fill my 12gallon tank.
 
OP
OP
mavereq

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
12 gallon might be a little overkill.

I don't think I need more than a small tank.

Half or one gallon should be enough for lockers, right?
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
Easily. Lockers just need a minimum supply. A half gallon would be more that enough.


Sent from my iPhone using Tapatalk
 

KyddsPly

Sr. Member
Joined
Nov 30, 2012
Messages
941
I went to E-Bay & checked out those VIAIR units .. I saw a couple I'd like to give a try but they say use only on a ONE Gallon TANK. I have a 12 gallon tank in my Bronco & I want mine to be able to cut on & off as I drive to keep the tank full. The adds said It doesn't cycle .. Are there units that will cycle & fill a bigger tank.
.. I'd bought a little unit from Harbor Freight & I would cycle but the hose leaked & it's fitting was a crimped unit. But I could flip the switch to it & while driving in my pasture it'd fill my 12 gallon tank to about 70lbs. But the Harbor Fright unit takes about 20 minutes to fill my 12gallon tank.



Install a Schrader valve to the tank. Fill the tank at a gas station and use the pump to keep full. Maybe a 95/120 switch to cycle the pump as needed.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
12 gal tank is way overkill for almost any onboard pump especially trying to get pressure say from 0 to 100 psi. Doesn't an ARB locker need about 80-90 psi? During those 20 min going from 0-70 psi how many times does your Harbor Freight pump overheat and shut down? How long would it take to get pressure to 100 psi even with a big compressor like at a gas station? Convert 12 gal tank to fuel and install a smaller air tank with a pressure switch to keep pressure at constant level. Your Harbor Freight pump would probably do better with a smaller tank.
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,048
http://www.ebay.com/itm/Puma-12-Vol...586347?hash=item41606c53eb:g:BBkAAOSwVL1WDrNB

separate the tank from the pump and mount wherever. The pump is VERY quiet, so you could mount it inside the cab and plumb to the tank underneath, or mount the pump in the engine compartment. I've used mine to run an impact wrench, not continuously, but enough to remove 5 lugs from stuck.

plus this is rated for continuous duty.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
If you're not wanting to run a belt driven unit, I'd just use the normal ARB compressor to run the lockers and then just get a powertank.
 

toddsrods

Full Member
Joined
Feb 1, 2011
Messages
200
If you plan on airing down for wheeling in snow/sand/rocks, the only one that will fill tires at a rate that doesn't piss you off is a belt driven compressor. You won't be dissatisfied if you go that route.
 

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
I run the bigger ARB Compressor but not the twin one. It fills my 37s from 10psi to 30psi on about 2 minutes per tire. I'm pleased with it. If I wanted faster I would get a powertank.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
If you're not wanting to run a belt driven unit, I'd just use the normal ARB compressor to run the lockers and then just get a powertank.

This is way too expensive for me. Cost of ARB compressor + Powertank = big dollars. You don't need a belt driven compressor. An ARB compressor with an added air tank will fill your tires in a reasonable time unless you're very impatient and running 44 " tires. You just leave the ARB compressor running while inflating your tires.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
I've had several over the years and my Viair's have been the best. I highly recommend 100% duty cycle as you won't have to worry about it later and the cfm's can be determined by intended use and air storage capabilities.

I'm currently running a 450c with 3 gallon tank.

Smittybilt lasted 3 months, haven't had a ARB, didn't like the size of the York belt driven.
 
Top