• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Original C bushings

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Even though the published specs didn't change, it is well known that the 76/77 axles have a little more factory caster in them. Just because published specs didn't change doesn't mean production specs matched.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
I'm not about to try to defend Ford's engineers for doing the right thing because they would always do it right... wiper placement comes to mind!! lol
 

Skinnyr1

Jr. Member
Joined
May 25, 2019
Messages
115
So......answer me this, as it seems to be along the lines of this discussion?

75 bronco. Stock height. 31" tires. PS. Do I put in 4 degree poly bushings?

That is the way I am leaning after reading all this.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
So......answer me this, as it seems to be along the lines of this discussion?

75 bronco. Stock height. 31" tires. PS. Do I put in 4 degree poly bushings?

That is the way I am leaning after reading all this.

I would do that.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
Pwr strg? Radials-what size?

I would but it's been so long since I've used stock arms that Todd or Paul and others who use them would chip in with their expertise...

IMO, I'd run 4deg, none less.

I welded on D60 knuckles at 6 deg. I'm running a much bigger tire, seems perfect for my long road trips.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
My '74 only had stock 0 degree bushings and had perfect return to straight. Even 2 degree bushings would have done no good. My '77 works perfectly with 0 degrees and 31" tires. I want to keep it that way. That's why I started this thread. I wouldn't and won't use poly that adds more caster. I explored poly thinking it may add some anti sway. I'm done with that idea.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,620
Loc.
PNW
Then that's good, it works for you-great.
 
Top