• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

pilot bearing/rear main

cantrem

Jr. Member
Joined
Jan 22, 2011
Messages
95
In preperation for a NV3550 swap I just dropped the t-case and manual trans (with only minor injuries) and I am down to the pilot bearing. I need to change the rear main seal also and was wondering if someone could give me a brief explaination on how these two pieces (pilot and seal) are tied together and if it mattered which one I tried to change out first.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Pilot bearing is in the center of the crankshaft end. The rear main is behind the flywheel. You have to remove the flywheel to get to the rear main. It doesnt matter which you do first but would be easier to remove and drive in the new pilot bearing with the flywheel out of the way. You will want to send out the flywheel to be resurfaced anyway unless you planning to use a different flywheel.
 
Top