• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

power brake help

IL_BRONC

New Member
Joined
Sep 30, 2010
Messages
41
Loc.
Central IL
Hey I did a search and know I've seen this addressed but couldn't find anything now of course.
I'm installing power brakes that I took off of a 76 onto my 66. I was able to use all the brackets and linkage but ordered a new booster from a vendor and a master cylinder from a local parts store..
It doesn't look like the rod coming from the booster is going to work with my master cylinder.
So what's up?
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
Most boosters have an adjustable rod. Just make sure it is the same lenght as the original one.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
If your new master cylinder has a much deeper well in the back of the piston than the one previously on the booster (if there was one that is), then it's either the wrong master in the box, the wrong part was specified by the store, or it's simply missing a little insert that fits in the back and takes up the extra space.

Or, like Justafordguy said, if it's just a little bit different, the booster rod is adjustable over a little range.

The manual brake master cylinders also had the hose ports on the driver's side, while the power boosted version of the master for a '76 would have the ports on the passenger side, facing the engine.

Paul
 
OP
OP
I

IL_BRONC

New Member
Joined
Sep 30, 2010
Messages
41
Loc.
Central IL
Thanks I'll look when I get home. My initial thoughts were that it was a mc for manual breaks because it came with the rod needed if I was hooking it directly to the firewall. I called the parts store and asked if they had multiple part numbers and they said there was only one number. That is obviously not true.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The inclusion of a rod is a dead giveaway to me. Only a manual brake master would have a need for a rod, and it would by design fit deeply into the back of the master.
So the only way that master could be used on a typical power booster would be if there was an insert.
There are boosters that have super long rods though, but I'm not sure if the EB's ever came with one like that. Don't remember ever seeing one anyway.

Paul
 
OP
OP
I

IL_BRONC

New Member
Joined
Sep 30, 2010
Messages
41
Loc.
Central IL
Hey Paul, I see you have a link to Wild Horses under your posts. This may be public knowledge to most but what is your connection?
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Hey Paul, I see you have a link to Wild Horses under your posts. This may be public knowledge to most but what is your connection?

Call WH on any Monday and talk with the world famous DirtDonk on the phone lines.

Almost as exciting as calling in to talk with your favorite DJ :cool:
 
OP
OP
I

IL_BRONC

New Member
Joined
Sep 30, 2010
Messages
41
Loc.
Central IL
Yeah I kinda figured that was the case. Thanks for taking the time to answer simple questions like this.
I always feel like I'm an expert with how much I read on here, but as soon as I start a project I realize.. maybe not so much.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Yep, I sneak in every Monday while nobody is looking and hang out with all the Bronco parts and get to talk to you guys whenever you call in.

Good stuff.

Paul
 
Top