• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

power steering options

zbronco

Contributor
Full Member
Joined
May 30, 2011
Messages
220
Loc.
Houston
I am looking to get a more modern steering for my bronco and looking for some input.. I have an EB power steering gear box with explorer pump. The steering is well what you would expect from an old bronco with power steering. I have been considering a custom built gear box from AGR performance. Matt at AGR has said he could build a box that could reuse my hoses and provide a modern feel.. He highly recommended a custom box vs the stock rebuilt gear box..

Can anyone tell me the difference between a 4x4x2 box and the AGR box or make a recommendation on what the best steering box would be for the price.

My bronco has 32” tires and is primarily driven on the street. The AGR box cost around 495 plus tax and shipping. I see rebuilt 4x4x2 boxes going from 300-500.. and the rockcrawler box (delphi) on ebay for under 300.

Has anyone had experience with all 3 steering boxes? Or recommend which box would be the best for a street application without breaking the bank and the pros and cons of each?

thanks
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Not sure what you mean by more modern feel as really PS is PS. now if you have a 773-75 steering box it will be a 6 turn box it can be converted to a 4 turn box for faster steering. really no big benefit on the street.
The 4x4x2 box is about the same 4 turns just a beefier box more for offroad strenght and big tires than anything. The delphi boxes tend to have quicker steering like 3.8 turns no real benefit other than they are fairly new.
Not sure on the AGR box all depends on what they are using I think they basically just rebuild your box and change the ratio. I dont see them being any better than anything else out there.
Another option if you want the quicker steering is to send your box to west texas offroad or amybe even PSC I believe they both can convert for 6 turn box to a 4 turn box. and its relative cheap.
Overall I'd stay with the stock steering box. All the others require modifications to make them work while some may seem cheaper by the time you get it all installed they wont be.
 
OP
OP
Z

zbronco

Contributor
Full Member
Joined
May 30, 2011
Messages
220
Loc.
Houston
Thanks for the response. much of the information is based on the direction from AGR. I understood the AGR box is 100% made by AGR not a rebuilt box. They will rebuild my box if I wanted to go that route. Per Matt at AGR there is a considerable difference in feel and performance between the AGR box and getting my box rebuilt at west Texas offroad for a quicker response.

If there is little to no difference in feel between and AGR and my stock I would defiantly go the cheapest route. The issue is I am getting conflicting information.
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I run the Delphi box from Borgeson and their hoses on my 74 with no issues. Not sure what the rockcrawler(delphi)box is.

Tim
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I can't get to ebay from work.......

I think "wesleydax" bought that box and had issues with it. I'm not sure so don't hold me to it but I'm almost sure. He installed it and had more play than he liked. It's for sale in the classifieds. Might want to send a PM and check it out.

My delphi box came with a warranty from Borgeson. I did buy it off ebay but it was shipped directly from Borgeson......

Tim
 

wesleydax

Full Member
Joined
Apr 12, 2011
Messages
331
I did have problems with my ebay box. it would not turn the same distance on each side and had more play than i thought it should. just last week i put a duffs box on it and love the way it drives.
 

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Last one in stock

Thank for the advertisment, but that was the last of the NEW gear box systems. We know off the Borgeson box for $459, but it will make it much easier if you would do the entire kit rather than try'n to piece the hoses and u-joints together. The entire kit includes everything you need for $875.






I did have problems with my ebay box. it would not turn the same distance on each side and had more play than i thought it should. just last week i put a duffs box on it and love the way it drives.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Read the AGR fine print for bronco boxes they need your box to rebuild. Im sure they may change teh ratios both input and output to make a quicker box but for the most part quicker boxes are not that great on a street bronco. The short weheel base of the bronco already provides a pretty quick response the faster the box ratio the faster you can get in trouble while doing 75mph.
in the end I dont see a lot of gain with going to a AGR box it will still be power steering as it was before maybe a little faster steering but no real differance.
One of the main reasons people go with the quicker ratios is when offroading with bigger tires you can turn quicker vs having to turn the steering wheel a lot. On the street its usally not a big deal as your not making a lot of tight turns.
 

nathan.hall1

Sr. Member
Joined
Feb 3, 2006
Messages
556
Loc.
Central Washington
I am about to put on an eBay Delphi box, I hope it works out manually turning it (uninstalled) it feels nice, no play either direction ill let you know how it works out

There are success stories on here, and a few horror stories, I hope to be one of the successful ones....
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
The AGR fine print does say that, but that's only of you want to use your old box. I had AGR build me a custom set-up for a modern feel with 3 1/3 turns. Yes, that can get ugly, but all my other cars have the exact same set-up so I'm used to it. You can pick whatever turn ratio you want, and whatever tension you want. Since I'm running a 5 speed and will be steering with 1 hand many times, plus using a smaller steering wheel, I picked the smaller number of turns. He will modify a new box and weld the bottom half on. Some people don't like welding to cast iron, but done correctly, it's not a problem. In fact, I just got mine last week. The price was slightly less than a 4X4X2 conversion, and I had roller bearings added .
 

Attachments

  • rsz_img_5468.jpg
    rsz_img_5468.jpg
    84.1 KB · Views: 65

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Have had my bronco for over 30 years both manual and auto all the time with a 6 turn box both stock and a smaller aftermarket steering wheel. steering on the street has always felt fine and even with a 6 turn box its plenty fast. broncos turn on a dime anyway how compard to a lot of other vehicles. The only time I've wished for less turns is on the trail in tight spots.
Theres a big differance between cars with quick steering and a bronco with quick steering. If you have good caster numbers it wont be a issue. if your caster is not so good then quick steering may not be a good option. maybe the more valid question is how does your bronco handle currently? The steering box itself doesnt really do much for overall handling.
I guess really all Im saying is if you currently have PS your not really gaining anything with the aftermarket box on a street bronco. If you didnt have PS to begin with then sure a box with all the bells and whistles is fine since you need a box anyways. Eitherway the choice is yours the aftermarket boxes are fine. I just dont think this "modern steering" moniker that they are touting is much more than a gimick. heck a lot of the "modern vehicles" have gone back to rack and pinion style steering. Which they also call modern steering systems.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... I too have a Org. Box rebuild by one of our venders . But I'll not tell names here.
.. Now when I 1st got mine back it was to be a 4 to 1 but it is a 3.25 to 1 turn. I like to have never got used to it.. As I drive a Dodge extended long bed truck. So short Bronco and 3.25 was killing me at 1st but now after about 4 years later I never even think of it. And I'd say that in the pasture afield wheeling .. I'd now say this ratio is much better than the 4 to 1. And the funniest part is My Running Buddy still wants everything to be ford org. So he has a 6 to 1 turn. While hunting out in New Mexico He is AssHoles and Elbows over his turning it to just get thru the cedars.
... You'll get used to any of them. Just drive it.
 

addicted

Bronco Guru
Joined
Jun 7, 2009
Messages
1,936
Loc.
Broussard, Louisiana
The AGR fine print does say that, but that's only of you want to use your old box. I had AGR build me a custom set-up for a modern feel with 3 1/3 turns. Yes, that can get ugly, but all my other cars have the exact same set-up so I'm used to it. You can pick whatever turn ratio you want, and whatever tension you want. Since I'm running a 5 speed and will be steering with 1 hand many times, plus using a smaller steering wheel, I picked the smaller number of turns. He will modify a new box and weld the bottom half on. Some people don't like welding to cast iron, but done correctly, it's not a problem. In fact, I just got mine last week. The price was slightly less than a 4X4X2 conversion, and I had roller bearings added .

Im very interested in the AGR box. Just kind of curious about the strength. Do you think it would hold up to 35s?
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Im very interested in the AGR box. Just kind of curious about the strength. Do you think it would hold up to 35s?

The problem isn't the box, the problem is the frame. Do a search on power steering and frame and you can see some nasty damage. I like the AGR box because the back is a flat plate, not "washers" like the factory box so it spreads the load out instead of being at 3 points. The other thing is the mounting plate is reinforced with braces (see pix) so you won't have to worry about an ear breaking off. My frame is solid and I'm not doing heavy wheeling so I was going to test fit it when I have the body back on. If it interferes with the radiator I already fabricated a plate to bring it out some (remember, it doesn't have the washers on the back so it will sit closer than factory. Also because it doesn't have the washers I'll be sealing mine to keep dirt and water from getting behind it, which might cause rust in the future). I also fabricated some DOM to replace the inner frame braces (the factory ones are U shaped), and fabricated a plate for the backside of the frame. You can buy the plate from BCB. I Don't know if the other houses sell the plate.

http://www.bcbroncos.com/store/product_info.php?cPath=37_144&products_id=331

I might just add the plate anyway for extra protection, but I'm going to test fit everything first. It's way easier to ADD welding than remove it later.

That's my opinion, but I would talk with Matt for his advice.
 

addicted

Bronco Guru
Joined
Jun 7, 2009
Messages
1,936
Loc.
Broussard, Louisiana
Im not too worried about the frame. Mine is really solid and I already have the BCB plate from when I was planning to run the 4X4X2 box. I dont plan on any rock crawling but I was wondering if AGR sets a tire size limit for the box you purchased. I like the fact that its a new box and bolts to the stock holes. And like you said, it isnt much more than the 4X4X2 conversion. So if it can handle 35"tires and moderate wheeling I would definitly like to purchase the same set up you have.
 
OP
OP
Z

zbronco

Contributor
Full Member
Joined
May 30, 2011
Messages
220
Loc.
Houston
Thanks for all of the responses.. It is still unclear to me if there is any difference between a AGR, stock and a 4x4x2 steering boxes from the perspective of street driving experience.

I do know AGR offers a new box or can rebuild my box.

has anyone moved from the stock PS to an AGR? was the driving feel significantly different? Based on AGR, there is a big difference in the AGR box and a stock box in driving feel.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Well seems like your going to have to be the guinea pig and find out first hand;D. Quicker steering is about all you will gain no matter what. As others said it takes some getting used to but you'll get used to it. A faster input ratio actually can make input effort higher. It still goes back to how your vehicle currently handles though as the steering box really has nothing to do with handling. It only assists in turning the wheels.
Id be really suprised if AGR boxes are really new boxes and cheaper/ about the same price as a 4x4x2 box after they modify one for a bronco. The labor and parts involved are not cheap. If they can do it for cheaper or about the same price and if they hold up then they may be missing out on a section of the bronco market.
 
Top