• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Power Steering pump replcement

Me2carcrazy1

Contributor
Jr. Member
Joined
Jan 11, 2019
Messages
130
I need to replace the original power steering pump for my '76 Bronco. Does anyone know where I could buy a OEM pump? I read in one thread it is a "Thompson" brand pump? However, I can't find one.
I am trying to keep the Bronco as original as possible. I am going to try and rebuild it with a kit but in case something goes wrong I would like to have a replacement option available.
Any help would be greatly appreciated.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I doubt you will find any new ones. Maybe get lucky and find a New Old Stock. But that is not something you will find on the shelf of any parts store. That is something like going to Carlisle during the Ford weekend and hitting the swap meet section.

Since you are trying to keep it original, probably the best you can find is a reman pump. Not even sure where you will find one. I have never gone looking for one.
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
The pump I bought in April has been fine. "Cardone 96-7054 New Power Steering Pump with Reservoir" I've had mixed luck with new Thomspon pumps, but this one has been good so far.

https://www.amazon.com/gp/product/B00Q0CTB3O/?tag=cbama-20

The issues I've had with both new & rebuilds within the last few years have been either leaks between reservoir and pump body or constant overflowing due to the frothing of the Type F fluid no matter how much I bled it.

Whatever pump you get, when you install it, you'll need to bleed it. There are write ups, but the general idea is to jack the front end up and cycle the steering wheel back and forth about 20 times with engine off. I'll do the same process again with the engine running. Otherwise you'll get frothing and puking of fluid.
 
Last edited:

helo-mech

Sr. Member
Joined
Jun 22, 2007
Messages
621
I need to replace the original power steering pump for my '76 Bronco. Does anyone know where I could buy a OEM pump? I read in one thread it is a "Thompson" brand pump? However, I can't find one.
I am trying to keep the Bronco as original as possible. I am going to try and rebuild it with a kit but in case something goes wrong I would like to have a replacement option available.
Any help would be greatly appreciated.
Yeah my '76 shop manual refers to the Thompson as well. Where are you located? I'll check this weekend when I get back in town, but I may have my old one lying around that you could have for another rebuild option if you are interested.
 

Attachments

  • Screen Shot 2022-07-27 at 4.48.58 PM.png
    Screen Shot 2022-07-27 at 4.48.58 PM.png
    1.6 MB · Views: 99
OP
OP
Me2carcrazy1

Me2carcrazy1

Contributor
Jr. Member
Joined
Jan 11, 2019
Messages
130
Yeah my '76 shop manual refers to the Thompson as well. Where are you located? I'll check this weekend when I get back in town, but I may have my old one lying around that you could have for another rebuild option if you are interested.
Thank you. Napa was out-of-stock, of course, They suggested I buy their Blue Devil Power steering Stop Leak instead. I am still looking for options. I am in Santa Maria, Ca. Let me know if you find a useable one lying around.
 
OP
OP
Me2carcrazy1

Me2carcrazy1

Contributor
Jr. Member
Joined
Jan 11, 2019
Messages
130
Yeah my '76 shop manual refers to the Thompson as well. Where are you located? I'll check this weekend when I get back in town, but I may have my old one lying around that you could have for another rebuild option if you are interested.
Do you know if the pump with reservoir is the same one used on the 71-77 Mustangs?
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
My suggestion is to pull your off & take it into your Local Napa store. a good OLD TIME PART GUY will most likely know where to get a replacement or even send your off & have it rebuilt.
.... Now that I've said that statement.. ''COVER YOU OWN BUTT'' Don't trade yours in for a core. keep it justin case what you get you don't want. Or it doesn't last long. Their old & sometimes rebuilding just doesn't hold up . But I'd think they could still get you a new rebuilt unit. A1Cardone is a pretty good company still unless they too have been bought out in the last year.
...... & Another shot go to a pick & pull yard... look at the E100 E300 VANS w/302. Pull yourself a Caned Ham pump which is a Saginaw. Get the
pimp & bolts & all the brackets. & GET THE HOSES ALSO MAYBE EVEN CRANK PULLEYS & w.p PULLEYS .GET EVERYTHING .
..... CLEAN IT ALL UP & paint your brackets . & put it all on without rebuilding any of it. You can buy ''SOMEWHERE '' BUSHING / FITTING if you need them to make the hoses fit your system. The Saginaw came on Fords . Granted it might not have been on your Bronco but it's a much better pump than the THOMPSON. I'M going to say change out all your power steering fluid from type F to clear power steering fluid .I've had better luck with it than Dexron. If that Saginaw pump leaks then It has a big D-Ring O-ring Around the outside of the case & a same gasket or o-ring on the bushing that holds the case to the pump body . I'll bet it's still good .. But if need be replacing then you can certainly get one from Naps.
As I recall those Saginaw's have several different disk washer under that bushing that holds it together . & they have different size holes in them letting more fluid pass . Basically I'll say you can change the amount of internal pressure giving you even easier steering .
I found that out while I was trying to mfg my own P/S Brackets about 15 years ago . I had about 5 canned hams pumps to choose from. It's sure been a long time since i JACKED WITH this issue.
But after doing my 72 Bronco ... I replaced the Thompson Pucking pump on my old 1980 300cid Bronco to a canned ham & It's never puke again on trail ride at the ranch in New Mexico 10 hour days rides ..
....... DO Some research & swap over.
.........................
........Oh you might google PSC ..com... I believe Power Steering Components sells some bolt on new pumps. But it won't look like your Org Bronco .It's a jeep P/S unit but it too is good. & They can rebuild your gearbox.
 
Top