• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Quarter pannel seam help

steward

New Member
Joined
Feb 21, 2006
Messages
5
Can anyone please give me some advice?Iam currently rebuilding a 74,and when i bought it I found some flaking on the drivers side rear quarter seam.It was not all the way threw at that time just some pits,so I media blasted the seam and took a fine wire wheel to the pitted areas also to try to get rid of any left behind rust,but in this cleanup proccess two or three pits opened up all the way threw about the size of a pin head,maybe .030 big. the rest of the pannel is in great shape.my question is ,can this rust be stopped there or do I need to just replace the whole pannel,so that I dont paint it and have it come back in a year.It seams like a double edge sword I would hate to have to replace the pannel for that small of a problem but I would sure hate to see a paint job go to ruin.thanks in advance for any advice..
Dan.S
 

huntingbuck101

New Member
Joined
Apr 24, 2005
Messages
26
I used POR15 then filled the seam with kitty hair fiberglass and then plastic body filler and then 2 coats of spray poly then primer. Dura block makes a sanding block that is round and is a exact fit to shape it to the shape of the doors if you cant find a Dura Block get a dowel that fits the shape of the door make shure to have good sharp 36 grit sand paper for thr fiberglass and start sanding before it totaly dry to save on some sanding. Sand untill you can see metal on the quarter and the edge of the top quarter. then body fill and prime to fill the pin holes ect. It's not alot of fun but it's cheap and it looks great. looks like the way they should have came from ford. I just did this yesterday
 
Top