• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

rear disc

spreadmonkey

Full Member
Joined
Dec 15, 2008
Messages
284
Loc.
Austin, Tx
I have been trying to figure out something for my rig lately, and best advice I can give is to read all the threads on it and then ask questions. There are a lot of differing opinions and several threads about it.

That being said...the consensus for the best performance on rear brakes seems to be keep your drums, upgrade to 11" drums, or do a ford explorer disk conversion (also most expensive)
 

Rockin69er

Sr. Member
Joined
Feb 10, 2008
Messages
601
I
That being said...the consensus for the best performance on rear brakes seems to be keep your drums, upgrade to 11" drums, or do a ford explorer disk conversion (also most expensive)

I did the 4 wheel kit from Toms. Everythings works fine and I am happy but if I do another one I will keep the rear drums and/or upgrade to 11" drums. I now know I like the emergency brake on drums better. My friends Bronco stops as good as mine with only front discs. The only time mine discs are better is when rock crawling or hunting when it has been raining, disc don't care much if their wet.
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
Stick with drums.
If you want stopping power, install Hydro-boost.
Rear disks are way over rated and really do not add much to stopping ability. Not nearly what Hydro-boost offers.
Drums are cheap and easy to maintain and the emergency brake is easy.
Oh, I have both setups on different rigs.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
the only place i have seen my rear disc setup really shine is after mud/water crossings and then easing over a drop where the rear end is the only thing holding. I did the hydroboost and rear disk at the same time. I wish i had just done the hydro so i had something to compare to.

My worthless $.02 is do hydro first if you already have front disc. You will most likeley find you won't need to do a thing to the rear.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
I tend to agree that the drums do stop as well or better. Have rear discs on both my eb and bb and I noticed a reduction in stopping power on the bb with the rear discs. There is a COOL factor that you have rear discs but it is far out weighed by the fact that the drums in our applications work as well or better.

I'm upgrading the bb to hydroboost to help. We shall see if it actually makes a difference.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
Forgot to mention the other reason for doing rear disc is after seeing a couple shots of the mess that happens if the rear wheel bearings let go or the shaft saps near the outer housing and the axle shaft comes out while traveling at speed :eek:

the caliper keeps things together
 

daddyg

Bronco Parts Collector
Joined
Dec 30, 2004
Messages
2,114
Loc.
Toney,AL
I agree they are over rated but I like the cool factor and I wheel in a lot of mud. That being said I did the Lincoln rear disk brake conversion on my trail rig.
 

Rockin69er

Sr. Member
Joined
Feb 10, 2008
Messages
601
Forgot to mention the other reason for doing rear disc is after seeing a couple shots of the mess that happens if the rear wheel bearings let go or the shaft saps near the outer housing and the axle shaft comes out while traveling at speed :eek:

the caliper keeps things together

Really????? The axle hub was still attached to the wheel and both fell OFF the truck.
 

Attachments

  • IMG_0005.JPG
    IMG_0005.JPG
    45.1 KB · Views: 76
  • IMG_0006.JPG
    IMG_0006.JPG
    34.8 KB · Views: 50
  • IMG_0011.JPG
    IMG_0011.JPG
    43.2 KB · Views: 55
  • IMG_0030.JPG
    IMG_0030.JPG
    33 KB · Views: 86

recoiljunky

Bronco Guru
Joined
Jul 19, 2007
Messages
1,478
Loc.
Dothan, AL. USA
I want disks because they look too cool and drums suck if you go mudding a lot (the drums fill up with mud.) Yeah, I know, you should wash the mud out of the drums, but disks look too cool!
 

Rockin69er

Sr. Member
Joined
Feb 10, 2008
Messages
601

Attachments

  • IMG_0018.JPG
    IMG_0018.JPG
    50 KB · Views: 31
  • IMG_0033.JPG
    IMG_0033.JPG
    49.4 KB · Views: 33
  • IMG_0039.JPG
    IMG_0039.JPG
    46.4 KB · Views: 31
  • IMG_0040.JPG
    IMG_0040.JPG
    44.6 KB · Views: 25

Rockin69er

Sr. Member
Joined
Feb 10, 2008
Messages
601
That recovery had to suck. How long did it take to get the Bronco on the trailer?

Once I got the trailer there, between driving (detroits both ends) and 3 wheel drive, the axle and bearing were still in the housing. And the winch, It only took about an hour.;D Waiting for my brother (45 min) having him drive me from Flagstaff to Cottonwood (1 hr) then hooking up my trailer and driving back up (1.5 hrs) then diving out to the Bronco with the trailer (1.5 hrs)..... loading. Then the drive out and home (2.5 hrs). O ya it happened the night before about 8 pm (dark, pics did not turn out) in the rain. It was my 13 YO's turkey hunt. No Turkey but he had a good time as seen by the pics he took. Here are a few he took.:eek: :eek: :eek: I was trying to figure out why he was laughing so much.:p
 

Attachments

  • IMG_0035.JPG
    IMG_0035.JPG
    43.3 KB · Views: 24
  • IMG_0036.JPG
    IMG_0036.JPG
    39.2 KB · Views: 25

carmi

Full Member
Joined
Aug 22, 2007
Messages
178
Loc.
Oroville
I used the TSM rear disc kit because I knew I would be upgrading my small bearing 9" to a big bearing (which I have since done). The TSM kit works for either bearing size. I never had much luck with the rear drums but I had also converted from the older 10 x 2-1/2 to the newer 11 x 1-3/4 drums due to parts availability at the time. The new discs which use the caddy style calipers with an e-brake have worked very well. I also converted to a Hydro Boost at the same time so I don't have a good comparison of just the disc vs. drums.
 
Top