Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
Rear upper shock mount removal
- Thread starter 66Coupe
- Start date
1971Bronco1971
Full Member
sawzall is your best friend!
bknbronco
Bronco Guru
If you have room to work in there with a welder its the best way. I have a 1" BL so I usually have plenty of room for things like that. I welded on a set of thm double shock mounts in the forward position and there really nice and simple. I have heard of guys welding a bolt on there, or even drilling and tapping it for a bolt to go the other way on, but id sawsall it off and grind the frame clean and weld on a complete new part if it were me.
