• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rivet tool

twisted 66

Contributor
Sr. Member
Joined
Oct 30, 2008
Messages
456
Loc.
Norcal-Tracy
What is the tool called that sets the rivets on the wing windows? These are for the seal strip and pivot stud L shape thing...Thanks in advance
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I'll bet there's something special but I used a hammer & punch.
Those rivets are tiny, but a finish nail punch works.
 

BigToe

Sr. Member
Joined
Nov 24, 2012
Messages
517
If I remember correctly, I found a punch used for installing snap type buttons at the local hardware store.
 

bronco t

Contributor
Sr. Member
Joined
Jun 28, 2010
Messages
799
Loc.
San Diego CA
The tool looks simple enough that one could machine the end of a small c-clamp and fold the rivet over.

The shop that did mine charged me either 10 or 20 bucks, and they pulled and reinstalled the glass. Well worth the price.
 

Greg_B

Bronco Guru
Joined
Apr 15, 2010
Messages
2,087
Loc.
Cohutta, GA
I gave up on trying to use the rivet that came with those. I just used an aluminum pop rivet them used a rivet anvil to flatten it out.
 
Top