• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rock Skis Recommendation

Underton

New Member
Joined
Feb 7, 2013
Messages
35
Loc.
Reno
I recently slammed a rock into my rocker panels and put a pretty good sized dent into the side. I've decided that it's time to upgrade them to something a little bit stronger and I was looking at a pair that Wild Horses sales. http://www.wildhorses4x4.com/product/Rock_Rails_Skis_Steel_Customizable_Rocker_Panel_Protection

I was wondering if anyone has every purchased these before? I've also seen people just weld some square tubing right there which I could imagine would be a little bit cheaper, but probably doesn't look as good.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I ran BCs for years on AZ rocks. The ¼" is very solid. I have lifted a side with a hi-lift directly on the BC slider and then drove off the jack. Couldn't hurt it.
I will also attest to they have the stock Bronco body shape to them. Looks much better then the home brew box tubing. The wild horse version looks like the BC version, but not having seen it in person I can't vouch for it.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
I used 2x5" tubing. You gain a few more inches of ground clearance this way. You'll have to ditch your aux. fuel tank, because cutting the rockers leaves it exposed. It certainly is cheaper to build this type yourself. I think the higher ground clearance, low profile tubing looks fine, plus the tubing offers a bit more protection because it sticks out an inch from the body. They're great for pivoting around rocks.

Mark
 

Attachments

  • 1150194_718794561464383_694351425_n.jpg
    1150194_718794561464383_694351425_n.jpg
    165.4 KB · Views: 120

OKLA70

Full Member
Joined
Dec 20, 2007
Messages
154
Loc.
Skiatook, Ok
I ran the 1/4" thick ski's from one the the vendors and they work great...BUT, after a summer of actually using them, the body pushed inward instead of denting. I didn't notice it til I put the doors back on. A brace between the frame and ski would solve that issue.

Tim
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I was gonna build some out of 2x6 but was too easy to by bc"s and bolt em on. Had an idiot in a lowered honda slam into the side of my 72. I couldnt even tell where he hit. The honda was jacked up
 

jkskier

Sr. Member
Joined
Jun 5, 2005
Messages
399
Loc.
Western Washington
Locofomoco rock skis, quarter inch thick, plug welded under the door sill and a couple arms to the frame. They're rounded to blend in like the factory rocker. Can't hardly tell they're there, can ya?



(4.25 inches of gained clearance)
 
Top