• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

roll cage install

windsor

Jr. Member
Joined
Feb 9, 2009
Messages
88
Loc.
Jackson, MS
I just ordered a Half Cab Roll cage from Extreme Custom Parts. It bolts to the floor pans under the dash and beside/behind the seats. I also ordered the frame connection pieces that will be welded in as well. The roll cage and frame connectors both meet at the floor pans and bolt together(for removal of the cage of course). I have a few questions.
1) has anyone here used this cage set up and do you have any pictures of the cage bolting to the floor pans? Are you satisfied with the purchase and how long did it take to install including fitting time, taking it out, putting it back in etc.

2) Are you experiencing any floor pan twist? I would imagine that these old trucks have major frame twist.

Thank you for any replies! All information shared is appreciated and Happy Easter to all Bronco owners/dreamers!!! ;D
 

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I have the 6 point family cage from Extream and like it but it took me a long time to fit it. I spent about 40 hours on it over two months. It did not twist my tub because I fit it to my tub.
 
Top