Saginaw PS pump with Explorer serpentine

[mgb0302]

Folks, based on some feedback I got from another one of my post concerning running hot for years, I am going to look for a Explorer serpentine setup. However, I would really like to keep my dual return saginaw PS pump for my hydro boost. So my questions are:

1) How do you run a Saginaw PS pump with an explorer serpentine?

OR

2) will the Explorer set up support a hydro boost?

 

[SteveL]

Pretty sure bc sells a Saginaw bracket for the explorer set up

 

[sanndmann3]

My truck has Explorer serp, 4x4x2 and hydroboost and 35 inch tires. when i'm aired down to 4 psi it does take more effort but i think its still acceptable. there are ways to increase the performance. threads are in the tech section.
If you need a serp set up let me know...

 

[Z Bronco]

I have the Explorer serpentine with a saginaw/delphi pump on my 351W. I got the kit from WH and a modified idler pulley bracket from a member on this board. Give them a call.

 

[garberz]

I’ve installed 3 of these brackets, they’re great! Great quality and finish, plus you can add an A/C pump on top if you want. The pump is held from the front, behind the pulley, like it was designed to be.

http://www.thebroncoguy.com/explorer-saginaw-bracket.html

Mark

 

[Montoya]

I’ve installed 3 of these brackets, they’re great! Great quality and finish, plus you can add an A/C pump on top if you want. The pump is held from the front, behind the pulley, like it was designed to be.

http://www.thebroncoguy.com/explorer-saginaw-bracket.html

Mark

I concur!

 

[fordguy]

broncoguy bracket is nice, i have it on my engine but have not run it. gives you the option of two different compressors, one for onboard air and the other for a/c

 

[RODRIG3911]

I'm using this bracket from WH on my explorer serpentine conversion with Saginaw pump. Works great

https://www.wildhorses4x4.com/produ...-Bracket-Set-non-AC-only/EXPLORER5ENGINEPARTS

 

[duffymahoney]

I concur!

What crank pulley is that?

 

[thegreatjustino]

I concur!

Your belt needs to run under the idler pulley, not over it. The smooth side of the belt should contact the smooth pulley.

 

[garberz]

Your belt needs to run under the idler pulley, not over it. The smooth side of the belt should contact the smooth pulley.

He’s right, you know!
Good eye there Justin!

Mark

 

[AndyT]

He’s a dumb question. I have a 92 HO 302 out of a Mustang. I’m assuming the explorer SERP setup would work with that engine??

 

[garberz]

He’s a dumb question. I have a 92 HO 302 out of a Mustang. I’m assuming the explorer SERP setup would work with that engine??

Yes, but you’ll need everything, including the timing cover. Everything is specific to the Explorer. Nothing from the Mustang SERP with interchange.

Mark

 

[mgb0302]

Montoya (or anyone else), is the idler pulley on the PS bracket from the explorer too? How does it bolt to the BC bracket?

 

[garberz]

Montoya (or anyone else), is the idler pulley on the PS bracket from the explorer too? How does it bolt to the BC bracket?

You use your existing idler pulley, the bracket come with a threaded boss that the pulley bolts to. Much like the stock bracket.

Mark

 

[mgb0302]

Ahh- much thanks

 

[GWBronco]

This is great as I just ordered this bracket the other day. It is great to see pictures of it installed!!

 

[lonesomecur]

Can anyone give a belt part number they used with this bracket, no a/c and 351?

I’m having trouble with belt coming off. Not sure if it’s too loose or something wrong with idler pulley.

 

[Z Bronco]

If the belt is coming off, things may not be completely lined up. I had that problem until a washer in the right spot fine tuned it all and no problems since.

 

[450rbronco]

Bringing up an old thread but what is everyone running for a pulley on their sag pump for the aero setup ?


Sent from my iPhone using Tapatalk