• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Shock tower hoops

powers4680

Full Member
Joined
Jun 2, 2010
Messages
326
If I’m only going to run single shocks is there a benefit to shock towers?


Sent from my iPhone using Tapatalk
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
By towers do you mean the hoops for multiple shocks? Or mounts like the f250 shock mounts?
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
I guess I should learn how to read a little closer before I start typing. I see the title says hoops. Sorry about that.
I have run both hoops and f250 mounts. I think there may be a little bit of strength advantage to a hoop, but they take up more space as well. If it was me I would use f250 style mounts, you can mount up just as long of a shock with them and they take up a lot less space.
Just my opinion, good luck!
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
On my Bronco I am running a wild horses 3.5" lift with the shocks it came with, and stock shock mounts. I took all four shocks off the other day and picked up one front wheel with a forklift until the rear wheel on same side lifted off the ground and measured all four shock mount lengths to see if the shocks were limiting flex. what I found is that on the rear, the suspension would compress about a quarter inch more than it would have had the shock been there and it would extend about an inch more than it would have had the shock been there.
on the front, the shock had almost 2 inches more travel in both direction than it could ever use with current setup. So my conclusion was that the front suspension was quite a bit stiffer than the rear. Until I do something to improve the front flex like install the longer radius bars my son made in shop class. there was no need to worry about the front shock length or mounts.
 

Attachments

  • 20180422_103606_1524431471331.jpg
    20180422_103606_1524431471331.jpg
    115 KB · Views: 87
  • 20180422_103556_1524431472055.jpg
    20180422_103556_1524431472055.jpg
    99.6 KB · Views: 80
  • 20180422_103543_1524431472654.jpg
    20180422_103543_1524431472654.jpg
    109.6 KB · Views: 86

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
As they were saying, the hoops allow for longer shocks. But that's not a real advantage for those not taxing their suspensions in the flex department anyway.
When the shock is the limiting factor in travel, a longer shock will help.
The "F250" mounts they're talking about are a much less expensive way to achieve a longer shock. Like these: Taller Shock Mounts

But there is a side benefit to a full hoop. Though minor and of uncertain value to most EB owners as well.
They act like a poor-man's strut-tower brace in a way. Stiffening up the frame a bit.
There is quite a bit more flex of the coil tower than you might think, and probably increases as the weight of a Bronco goes up. Welding the semi-triangulated hoop to the tower and frame gives it more support. I've talked to people that said they felt the difference immediately. Subtle, but could be felt.
It's not like it turned into an auto-crosser of course. Just took some vagueness out of the overall road feel. This was with just a single shock installed.

Paul
 
Top