Source for build your own PS hose?

[cactushorse]

I haven't had any luck finding the hose. The reusable fittings are widely available but my search for the hose is coming back zeros!

Looking for this size

http://www.summitracing.com/parts/fra-259006

 

[bronconut73]

WH has got kits. Hose, fittings, etc...

 

[cactushorse]

WH has got kits. Hose, fittings, etc...

I just got one. Looks like I will need one more to complete my hydro install. I just thought it would be nice to get some extra hose for future repairs.

They don't sell just hose. i'm told they receive the kits complete.

 

[needabronco]

Try an industrial/fleet supply or tractor supply store. That's where I get my fittings and hose from.

 

[DirtDonk]

Did you check with us recently cactushorse? I've seen more and more hose kits recently, and not just that 250 buck chuck one we get premade for us.

We also sell kits with just short sections of hose, but I'm not sure if we cut them ourselves or if we get them pre-cut like the other kit.
If we cut them ourselves, I don't see why we couldn't sell it by the foot as well.

Give us a call and we can check.
The ones I'm thinking of are these:

http://www.wildhorses4x4.com/product/Power_Steering_Pressure_Hose_Kit

http://www.wildhorses4x4.com/product/Ram_Hose_Kit

Worth a call at least.
If you don't get a chance to call in, I'll check on Monday anyway and report back here when I can.

Paul

 

[ryansbronco]

my local napa builds them on site
normally no wait

 

[airbur]

Summit carries 100s of options for -6 AN hose. I bought all of mine there.

 

[broncnaz]

X2 on summit racing they have what you need. Most speed shops have it or can order it.
Heck you may even try Hose power over on country club or the one on flowing wells.

 

[nathan.hall1]

my local napa builds them on site
normally no wait

That's where I got mine

 

[73azbronco]

I used a hydraulic specialty place called Phoenix Fleet repair down by 19th ave and Osborne, by the Alaskan Bush Club. Very reasonable prices and do it while I waited.

 

[rguest3]

I use the Goodyear Hydraulic shop close by.

Can make just about everything hose wise.

 

[cactushorse]

Did you check with us recently cactushorse? I've seen more and more hose kits recently, and not just that 250 buck chuck one we get premade for us.

We also sell kits with just short sections of hose, but I'm not sure if we cut them ourselves or if we get them pre-cut like the other kit.
If we cut them ourselves, I don't see why we couldn't sell it by the foot as well.

Give us a call and we can check.
The ones I'm thinking of are these:

http://www.wildhorses4x4.com/product/Power_Steering_Pressure_Hose_Kit

http://www.wildhorses4x4.com/product/Ram_Hose_Kit

Worth a call at least.
If you don't get a chance to call in, I'll check on Monday anyway and report back here when I can.

Paul

It was just last week when I ordered and asked about extra hose. I got this kit:
http://www.wildhorses4x4.com/product...ssure_Hose_Kit

Times being what they are, I would rather support one of our vendors instead of one of the big boys.

 

[cactushorse]

I used a hydraulic specialty place called Phoenix Fleet repair down by 19th ave and Osborne, by the Alaskan Bush Club. Very reasonable prices and do it while I waited.

Now why would you think i would know where the Alaskan Bush Club is??;D;D;D

 

[cactushorse]

X2 on summit racing they have what you need. Most speed shops have it or can order it.
Heck you may even try Hose power over on country club or the one on flowing wells.

I wasn't aware they were on Flowing Wells. I pass it daily so I will check them out.

 

[broncnaz]

I've never been to the one on flowing wells. I've been by the one on country club tho.

 

[airbur]

Seriously, build your own. Then you'll know how to repair them. I'd never built a hose in my life and just finished plumbing Hydroboost and an entire EFI fuel system. It's a great learning experience and I feel confident in my ability to repair.

 

[DirtDonk]

He actually is building his own already. He got one of our fitting and hose kits but simply wanted some extra hose to complete the kit and have extra as spare.

After a thorough investigation (I just asked the other Paul ) I verified that we don't anymore. Funny how that works sometimes, eh? We used to, but not many used us as their source.
We are sourcing them as complete kits, as you were told cactushorse. Since they're so much less expensive than our other full hydro kit (#3065 http://www.wildhorses4x4.com/product/Generic-SS-Braided-Hydro-Boost-Hose-Kit ) I thought they might be built in-house.
So yes, your info was correct and we only have the 3' and 6' hose kits, both with fittings.

Not sure if we'll be bringing bulk hose in again or not, but hopefully we'll be able to offer that again in the near future.
I'll put it to the powers to see what they say. That won't help you right now, but at least it's something we can do the next time.

Thanks

Paul

 

[cactushorse]

Thanks Paul. I IM'ed you before I read your post here.

 

[n59rob]

hose kits

I just got a complete set of hoses,fittings, and adapters for the hydroboost setup from PSC in Ft. Worth for $112 shipped to my door. Not installed yet but looks good so far!

Robert