• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Steering column re-assembly questions

kaisermusic

Sr. Member
Joined
Aug 30, 2004
Messages
467
Loc.
Chehalis WA
I have a stock 1967 steering column I took apart to refinish. I switched to a flood shifter, so do I even need to include the shift tube in the reassembly?

Also, I cant figure out what holds the lower bearing sleeve in place. There's a clamp there, but I cant seem to find a retaining washer the size of the bearing sleeve for the clamp to rest on? My shop manual doesnt have good enough pics for me to identify the pieces i have. Does anyone have some pictures of their rebuild I can refer to?

Thanks!
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
OP
OP
K

kaisermusic

Sr. Member
Joined
Aug 30, 2004
Messages
467
Loc.
Chehalis WA
ok I think i found the piece now. Thanks!

Also, is the rubber "boot" down where the steering rod connects to the lower joint essential? I want to get this hooked up and mine fell apart when I took it out. I plan on getting another, but can it be assembled without just to get it to my shop from paint shop?
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Top