• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Steering column/shaft assembly

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
I need a little help. I know I am missing some stuff on my steering shaft, and not sure what it is. My Bronco is not really “original” so a lot of parts seem to be missing along the way. Steering shaft is a good example. I took my shaft apart to clean up the bearings and starting adding a little logic. That’s where i went wrong I guess.

So at the bottom of the column the shaft has a plastic bearing race that slides up in the bearing of the column. There is a little washer with felt on it and a clamp that I installed.

I have an aftermarket wheel so it has what looks like a Grant kit. I have a metal bearing race that slides down in my bearing. The splined adapter slides onto the shaft, i put the black sheet metal cover over it, put the wheel on and i install the big nut. I read about a spring that gets installed to keep the pressure on the bottom bearing. Is that correct? The way I have it now doesn’t seem right and I’d appreciate any advice or pics.

Also, how it he heck do i get a horn on the wheel? The contacts work, but I have a push button on the dash for a horn.

98661bcd5bdc1a767ce79d1ea398e811.jpg
57e50640bbe08075f73eb6e0321fe5e6.jpg
b1663ee2514697d238043b230353fb27.jpg
ad1843eb0171aca5d6d93e6de1730ae9.jpg
0ec7a1f4f13bbde9d263c751cef0f745.jpg
a702748452dd21443f064023e554f689.jpg



Sent from my iPad using Tapatalk
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
I believe Grant has a kit for the horn button assembly as well. Might get on their site and check it out. It has a contact plate that touches the two prongs on the turn signal switch, It is built onto the splined piece that goes onto the shaft. I think the one you have is for a stock steering wheel, not sure by the pic. Here is a link to one that shows a pic, not sure its the correct one but you can see what it looks like.

https://www.wildhorses4x4.com/produ...ter-74-77-Bronco/bronco-steering-wheel-custom
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
You are correct on the spring. It slides on top of the metal bearing sleeve and the steering wheel adapter puts pressure on it. Not sure what year column you have but here is a link to the spring on earlier models. Hope it helps!





https://www.tomsbroncoparts.com/product/upper-column-shaft-spring



Absolutely! Mine is a 68 so this works perfect. That Grant kit at Wild Horses you posted is for a later model. Do you know what the difference is? That was problem before. I couldn’t find a Grant kit for the 68, so I just stuck with what I have.


Sent from my iPad using Tapatalk
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
I was looking at your pics again. Is there a bearing in the top of the column under the metal sleeve? Pics make it look like it is missing.
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Langester - Thanks man. I couldn't find the part numbers on Grant. That is super helpful.

Yes there is a bearing in the top at the column.
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
No problem. I was doing some searching on the net and somehow I got to that page, no idea how I got there.
Good luck with it!
 
Top