Steering shaft alignment

[boomeroid]

I put a 1" body lift on and now I'd like to get my steering shaft aligned with my steering box. It's only off about 1/2 an inch, but I'd like to get it a little better. It is a '69 with manual steering. Is there any adjustment to be had at the firewall or the dash?

 

[Viperwolf1]

You can slot the bolt holes for the column support bracket so it will drop down further in the engine bay. The under dash column bracket already has slotted bolt holes (I think this was manual columns only) so you can push the column out a little.

 

[boomeroid]

Thanks, that makes sense.